VIP member
Microwave veneer drying equipment
Tunnel type microwave veneer drying equipment is an important device in the production process of plywood, and the quality of veneer drying directly a
Product details
Tunnel type microwave veneer drying equipment is an important equipment in the production process of plywood, and the quality of veneer drying directly affects the quality of veneer and plywood products. The design of the veneer dryer produced by our company mainly utilizes new internal heating technology for non-contact heating and drying of veneers.
1. Tunnel styleMicrowave dryerThe drying speed is fast, which greatly improves the utilization rate of the occupied space and thus eliminates the occupation of farmland by the drying yard. The pollution caused by the large amount of debris accumulated on the drying yard drifting with the wind can also be avoided.
2. Easy to operate, teach and learn. Fewer operators, increased per capita production capacity, and reduced labor costs.
3. The drying process is static and does not require power consumption.
4. The heat dissipation board is in direct contact with the veneer and dries in a flat state. During the benign physical process of wood shrinkage, the veneer does not warp or deform, has a low damage rate, and a high yield of finished products.
5. The wood panel surface is directly heated, with good heat uniformity, which is conducive to the removal of moisture from the veneer. It has high thermal efficiency, fast drying, uniform final moisture content, energy saving and consumption reduction, significant social benefits, reduced drying costs, and benefits for enterprises.
6. Avoiding the deterioration of damp veneers due to weather conditions, effectively improving the drying quality, and ensuring product quality, plywood companies have thus freed themselves from the days of relying on the weather for "food" and carried out drying operations 24 hours a day.
7. The equipment has low steel consumption and manufacturing costs.
8. Less one-time investment highlights the cost-effectiveness advantage.
Single board drying equipmentTechnical parameters:
Microwave power: 60KW (adjustable)
Dehydration rate: 60 kg/hour
Power supply: three-phase five wire 380V
Microwave frequency: 2450 ± 50MHz
Height of inlet and outlet: 70mm
Belt width: 750 mm
Transmission speed: 0-5 m/min
Drying temperature 50-100 degrees (adjustable)
Dimensions (length x width x height): approximately 22050 x 1362 x 1750mm
Working environment: 0-40 ℃, relative humidity ≤ 80%
The veneer drying equipment produced by our company can also be used as veneer drying equipment or wood chip drying machines,Wooden board drying equipment，timber dryerIn the application, only appropriate adjustments to the production process are needed. Due to the fact that the device is a non-standard device, the above parameters are for reference only. Please call us directly for more information.
1. Tunnel styleMicrowave dryerThe drying speed is fast, which greatly improves the utilization rate of the occupied space and thus eliminates the occupation of farmland by the drying yard. The pollution caused by the large amount of debris accumulated on the drying yard drifting with the wind can also be avoided.
2. Easy to operate, teach and learn. Fewer operators, increased per capita production capacity, and reduced labor costs.
3. The drying process is static and does not require power consumption.
4. The heat dissipation board is in direct contact with the veneer and dries in a flat state. During the benign physical process of wood shrinkage, the veneer does not warp or deform, has a low damage rate, and a high yield of finished products.
5. The wood panel surface is directly heated, with good heat uniformity, which is conducive to the removal of moisture from the veneer. It has high thermal efficiency, fast drying, uniform final moisture content, energy saving and consumption reduction, significant social benefits, reduced drying costs, and benefits for enterprises.
6. Avoiding the deterioration of damp veneers due to weather conditions, effectively improving the drying quality, and ensuring product quality, plywood companies have thus freed themselves from the days of relying on the weather for "food" and carried out drying operations 24 hours a day.
7. The equipment has low steel consumption and manufacturing costs.
8. Less one-time investment highlights the cost-effectiveness advantage.
Single board drying equipmentTechnical parameters:
Microwave power: 60KW (adjustable)
Dehydration rate: 60 kg/hour
Power supply: three-phase five wire 380V
Microwave frequency: 2450 ± 50MHz
Height of inlet and outlet: 70mm
Belt width: 750 mm
Transmission speed: 0-5 m/min
Drying temperature 50-100 degrees (adjustable)
Dimensions (length x width x height): approximately 22050 x 1362 x 1750mm
Working environment: 0-40 ℃, relative humidity ≤ 80%
The veneer drying equipment produced by our company can also be used as veneer drying equipment or wood chip drying machines,Wooden board drying equipment，timber dryerIn the application, only appropriate adjustments to the production process are needed. Due to the fact that the device is a non-standard device, the above parameters are for reference only. Please call us directly for more information.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-