Amtax CompactThe basic principle is as follows: after mixing the water sample and masking agent, the ammonia nitrogen existing in the form of free ammonia or ammonium ions reacts with salicylic acid and hypochlorite in an alkaline environment and in the presence of sensitizers to form a colored complex. The analyzer detects the color change and converts it into ammonia nitrogen value for output. The amount of colored complex generated is equivalent to the amount of ammonia nitrogen. The ammonia nitrogen analyzer uses optical transmission to monitor the amount of ammonia nitrogen emitted.

Amtax CompactCharacteristics:

1. Unique design enables the product to have lower failure rates, lower maintenance requirements, lower reagent consumption, and higher cost-effectiveness compared to similar products.

2. Select valve components: Choose the timing for reagent sampling.

3. Measurement component: Accurate measurement of reagents is achieved through a visual photoelectric system, overcoming quantitative errors caused by wear of peristaltic pump tubes; At the same time, precise quantification of trace reagents has been achieved, with each dose being only 1.5 milliliters, greatly reducing the amount of reagents used.

Amtax CompactCharacteristics:

1. Unique design enables the product to have lower failure rates, lower maintenance requirements, lower reagent consumption, and higher cost-effectiveness compared to similar products.

2. Select valve components: Choose the timing for reagent sampling.

3. Measurement component: Accurate measurement of reagents is achieved through a visual photoelectric system, overcoming quantitative errors caused by wear of peristaltic pump tubes; At the same time, precise quantification of trace reagents has been achieved, with each dose being only 1.5 milliliters, greatly reducing the amount of reagents used.

4. Sample injection component: Peristaltic pump negative pressure suction, there is always an air buffer zone between the reagent and the pump tube to avoid corrosion of the pump tube.

5. Sealed digestion component: High temperature and high pressure digestion system accelerates the reaction process and overcomes the corrosion of equipment caused by the volatilization of corrosive gases in open systems.

6. Reagent tube: Imported modified polytetrafluoroethylene transparent hose with a diameter greater than 1.5mm is used to reduce the probability of particle blockage in water samples.