MRQ-A oil mist lubrication system-Fornitore globale

Mirang Technology, 5th Floor, Building A, Redwood Town, Gongming Street, Guangming District, Shenzhen, Guangdong Province

Performance and Features
·The system is equipped with solenoid valves that can be installed with pneumatic pressure regulating valves to precisely control the gas source and mix it thoroughly with lubricating fluidAtomization reduces the wear and tear of mechanical cutting tools, resulting in better cooling and lubrication effects.
·a . Digital display control: Both cooling and lubrication time and interval time can be adjusted. There is usually a lock key function inside, which can be lockedThe lubrication and intermittent system can be set after setting, and the "L U B" lubrication also has a power-off memory function,If the working time is set to 16 seconds and the power is cut off after 14 seconds, you can continue to count from 1 to 4 seconds for the next power on-9 9 9 (seconds), "INT" Interval: 1-9 9 9 (seconds) Special requirements can be customized
·b . PLC control: Cooling lubrication time and interval time are controlled by external PLC
·c . Uncontrolled: There is no need to control the cooling lubrication and intermittent time
·Equipped with a liquid level switch, the buzzer will sound an alarm signal and send an abnormal signal when the cooling lubricant is insufficientOutput. The digital controller displays E R O when the liquid level is insufficient.
·The panel indicator light can display lubrication and intermittent status
·The system recommends using a pressure of 0 4 - 0 . 6 M P a
·Default liquid and tracheal diameter 6 mm
·It is used together with (MP V type) self-priming cooling lubrication spray.

Performance and Characteristics
· the system is equipped with a solenoid valve that can be equipped with a pneumatic pressure
regulating valve to precisely control the air source and fully atomize it with lubricating fluid to
reduce the loss of mechanical tools and achieve better cooling and lubrication effect.
·a. Digital display control: adjustable cooling and lubrication time and intermittent time. 'LUB'
lubrication: also has a power failure memory function, such as the working time set 16 seconds
to 14 seconds of work, the next power can continue to press 14 seconds start timing 1-999
(seconds), 'INT' intermittent: 1-999 (seconds) special requirements can be customized
· b.plc control: cooling and lubrication time and intermittent time are controlled by external PLC
·c. No control: no control is required for cooling and lubrication and intermittent time· with liquid
level switch, the buzzer will send out alarm signal and output abnormal signal when the cooling
lubricant is insufficient. Digital display controller liquid level is insufficient to show ERO.
· the indicator light on the panel can show lubrication and intermittent state
· air pressure of 0.4-0.6mpa is recommended for the system
· default diameter of liquid and trachea is 6mm
· suitable for use with (MPV) self-priming cooling and lubricating sprayer.