VIP member
MG8750 Ultrasonic Liquid Level Gauge
Measurement parameters: liquid level, material level Electrical interface: 1/2NPT or M20 × 1.5 input voltage: 15-36VDC with polarity reversal protecti
Product details
Measurement parameters: liquid level, material level
Electrical interface: 1/2 "NPT or M20 × 1.5
Input voltage: 15～36VDC
Protection against polarity misconnection
Process pressure: 0～3bar（0～0.3MPa)
Process temperature: -40 to 158 ℉
(-40～70℃)
Output signal: two-wire system
4-20mADC HART
Measurement accuracy: ±0.5％
Damping: 0.2～30S
Alarm: High alarm set to 21mA,
Low alarm setting 3.6mA
Launch angle: 10°
blind area: 0.25～1.0m
Measurement range: 11.8～590"
(300～15000mm)
Process connection: flange connection
Explosion proof mark: intrinsic safety Ex ia Ⅱ C T1 ～ T6
Protection level: IP67
MG8750 Ultrasonic Liquid Level Gauge
The transducer emits ultrasonic pulses, which are reflected back when they encounter the surface of the medium. Some of the reflected waves are received by the transducer and converted into electrical signals. By calculating the time interval through the circuit module, the height of the object level can be accurately measured.
Not affected by changes in medium density and temperature;
The liquid receiving components are made of all stainless steel and polytetrafluoroethylene materials, which are resistant to corrosive media such as strong acid and alkali;
● Maintenance free, core components are non-contact with the medium and do not require regular maintenance.
Liquid, slurry, particle, powder, flake, high viscosity, easy to crystallize hanging media and mixed media.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-