VIP member
MG8530 floating ball liquid level/interface transmitter
Measurement parameters: liquid level, interface installation method: side installation, side to side medium density: ≥ 50Kg/m ³ maximum turning angle:
Product details
Measurement parameters: liquid level, interface
Installation method: side mounted, side mounted
Medium density: ≥ 50Kg/m³
Maximum turning angle: 35 ° for ordinary models; The large angle type is 135 °
Electrical interface: 1/2 "NPT or M20 × 1.5
Input voltage: 13.5-30VDC, with polarity reversal protection
Process pressure: 0～63bar(0～6.3MPa)
Process temperature: -40~842 ℉ (-40~450 ℃)
Output signal: 2-wire 4-20mADC HART
Measurement accuracy: ±1％
Process display: 4-20mA, percentage, engineering unit
Measurement range: 15～63"(380～1600mm)
Process connection: flange connection
texture of material: 316LSST, 304SST, carbon steel, etc
Explosion proof mark: intrinsic safety Ex ia Ⅱ C T1 ～ T6
Explosion proof Ex d Ⅱ C T1 ～ T5 Gb
Protection level: IP67
MG8531 ordinary float level/interface transmitter
MG8532 Intelligent Floating Ball Level/Interface Transmitter
The change in the float causes a change in the sensor, which is directly proportional to the change in sensor resistance. The float changes synchronously with the liquid level, and the resistance signal is converted into a 4-20mA signal by the module to accurately measure the liquid level height.
Suitable for liquid level measurement of high viscosity medium slurry, viscous and dirty medium, asphalt, grease, etc;
● Easy calibration, dry calibration;
● Wrong wiring and reverse connection protection, resistant to radio frequency interference.
Measurement of high viscosity media such as hot heavy oil, asphalt, viscous and dirty media, and grease.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-