Bowl grinder/Mortal grinder MG100

Power Mortar Grinder MG 100

Bowl grinder/The mortar grinder MG100 can be used for mixing or grinding samples with hard, soft, brittle, or paste like properties. It can perform dry grinding, wet grinding, or frozen grinding on samples. In modern laboratory applications, MG100 has extraordinary performance not only in processing capacity but also in operational comfort and safety.This product complies with CE safety certification.

MG100 bowl grindertechnical parameter

application area: Crushing, mixing, homogenization.

Sample characteristicsSample preparation for soft, hard, brittle, and paste like materials with a Mohs hardness value not exceeding 9.

Suitable for typical samplesMaterials such as soil, pills, grains, glass, chemicals, food, silicates, biological tissues, yeast cells, etc.

Injection sizeNot exceeding 8mm.

Zui final sample size: Less than 10um.

Effective volume： 10ml~200ml.

Grinding method：Dry grinding, wet grinding, low-temperature frozen grinding.

Grinding time setting: 0-99 minutes or continuous operation.

Pressure regulation of mortar and pestleSure, through the ruler.

Scraper plate pressure adjustmentSure, by turning the knob.

Rated power of motor180 watts.

speed: 50-130 revolutions per minute.

MG100 bowl grinderworking principle

The grinding bowl rotates at a certain speed, and the grinding pestle is located at an eccentric position of the grinding bowl. Pour the sample to be processed into the crushing zone between the grinding bowl and the pestle through the top feeding window. The sample is crushed and rubbed between the inner surface of the grinding bowl and the pestle, while being crushed and stirred at the bottom of the grinding bowl and pestle. The scraper on the grinding bowl can ensure that the sample is crushed during each grinding cycle, ensuring the uniformity of the final sample.

/Main advantages and performance of bowl grinder

1. Easy to clean；

2. Suitable for dry grinding, wet grinding, and frozen grinding；

3. For rough samples, pre-treatment can be chosen；

4. During the grinding process, the sample volume can be increased through the feeding window；

5. Due to the wide selection of scraper materials, they can meet all application tasks (polyurethane, polytetrafluoroethylene, beech wood)；

6. The position of the mortar and pestle can be adjusted and moved without the need for tools；

7. Due to the scale adjustment, the pestle head can be accurately and repetitively set；

8. Due to the setting of digital time and speed, the grinding results are representative；

9. Suitable for samples with different thermal sensitivities, ensuring accurate and optimized grinding results；

10. Due to the multiple selectivity of grinding tool mortar and pestle head materials, they can meet all application tasks.