MF-08 oil suction filterDuring the operation of hydraulic systems, it is inevitable to add many solid particle pollutants. Therefore, hydraulic systems must continuously remove solid particle pollutants to ensure the achievement of the system's target cleanliness. The oil filter adopts a filter element made of porous filter material, which intercepts solid particles in the system medium through surface interception and curved pore adsorption, thereby achieving the purpose of purifying the medium. At the same time, the solid particles intercepted blocked the medium channel of the filter element, causing an increase in pressure difference between the two ends of the filter element.

1. The filter element of this filter is installed on the suction side of the oil pump to prevent dirt from entering during pump suction and protect the system.

2. Extend the service life of pumps and systems, and reduce the occurrence of failures during continuous operation.

3. Complete specifications, suitable for various mineral oils, gasoline and other liquids.

4. The working oil temperature is 90 ℃, suitable for various mineral oils, gasoline and other working fluids.

Model: MF-08

Filter material: metal mesh

Pipe thread: 4 inches

Filtering accuracy: 100~180um

Work pressure: 0.6Mpa

Work flow rate: 1000L/min

1. Metallurgy: Used for filtering hydraulic systems of rolling mills and continuous casting machines, as well as filtering various lubrication equipment.

2. Petrochemicals: Separation and recovery of products and intermediate products in refining and chemical production processes, as well as particle removal and filtration of oilfield injection water and natural gas.

3. Textile: Purification and uniform filtration of polyester melt during wire drawing process, protective filtration of air compressor, and removal of oil and water from compressed gas.

4. Electronics and pharmaceuticals: pre-treatment filtration of reverse osmosis water and deionized water, pre-treatment filtration of cleaning solution and glucose.

5. Thermal power and nuclear power: Purification of oil for lubrication systems, speed control systems, bypass control systems of gas turbines and boilers, purification of feed pumps, fans, and dust removal systems.