VIP member
Loading bracket for separating funnel (maximum 500 ml)
Loading bracket for separating funnel (maximum 500 ml)
Product details
Loading bracket for separating funnel (maximum 500 ml)
Each bracket can hold up to 3 funnels at a time and can hold up to 500 ml of funnels. One or two funnel-shaped support brackets can be installed on the oscillator. Install the funnel plug downwards and adjust it to the appropriate position. Secure the funnel with an adjusting rod and the funnel plug with an elastic band. If the mixed substances generate pressure during the oscillation process, a vent valve can be used instead of a funnel plug, fixed with elastic bands, and the vent valve will automatically open to release pressure when the pressure exceeds 1 psi.
Loading bracket for separating funnel (1000 ml&larger)
Used to install a 1-liter or 2-liter separating funnel, it can rotate from the vertical position to the 45 or 60 position for oscillation and then return to the vertical position for liquid addition or extraction. Need to use the universal installation platform BT6000
Cone shaped bottle support bracket
You can install 1 to 4 conical bottles at once. You can use a conical bottle without a lid (soft oscillation), or you can use a threaded or conical lid. An elastic band can fix the bottle cap. Up to two load-bearing brackets can be used at a time, and the locking knob fixes the brackets in the optimal position for easy installation and oscillation. The bracket can rotate 180 degrees during installation Each bracket can accommodate 3 500 ml or 4 125 ml or 250 ml conical bottles, or can be installed in size combinations.
Fat extraction tube bracket
This bracket can be used for Mojonnier fat extraction with a desktop oscillator Each bracket can accommodate up to 4 containers with a diameter of 37 mm. A maximum of 2 brackets can be installed per unit The maximum load-bearing capacity is 2.3 kg, and no additional balancing material is required Containers without bottle stoppers can oscillate up and down. When oscillating horizontally, bottle stoppers need to be used and fixed with their own fixators
Test tube rack oscillation head
The test tube rack can oscillate one or two entire test tubes at the same time Can be used for bottles, conical bottles, or other containers with stoppers The test tube rack is fixed with a fixture If the bottle stopper becomes loose during installation, this fastener will automatically keep the lid tight The existing test tube rack 12 "x 5" (30.5 x 12.7 cm) can hold stoppered test tubes ranging from 75 to 200 mm in length
Universal installation platform
The universal installation platform is used to install BT series glassware support brackets It also includes a platform that can install various containers that require oscillation Easy to install on top of the oscillating head, secured with three fastening screws The BT series bracket can also be easily installed on the reserved mounting holes on the platform Two screws fix one bracket, and one platform can only hold up to two brackets
Big Three Claw Clamp
The large three jaw clamp can be used on a desktop oscillator Can hold various 3-1/2 "(89 mm) diameter glassware The fixture can be adjusted to the most effective oscillation angle. Can be ordered separately.
Centrifugal tube bracket
Centrifugal tube supports can oscillate vertically to release gas or vertically oscillate containers with plugs Each bracket can accommodate 8 centrifuge tubes, and 3 brackets can be installed simultaneously, with a maximum load capacity of 2.3 kg. Please refer to the table below for selection, as different requirements require customization
Three claw clamp
Three jaw fixed clamp, universal fixture, PVC clamp mouth, adjustable upper and lower fixing claws, suitable for fixing objects of different sizes.
The three claw clamp can be used on a desktop oscillator Can hold glassware with a maximum diameter of 80mm The fixture can be adjusted to the most effective oscillation angle. Up to 6 triangular claws can be installed.
Each bracket can hold up to 3 funnels at a time and can hold up to 500 ml of funnels. One or two funnel-shaped support brackets can be installed on the oscillator. Install the funnel plug downwards and adjust it to the appropriate position. Secure the funnel with an adjusting rod and the funnel plug with an elastic band. If the mixed substances generate pressure during the oscillation process, a vent valve can be used instead of a funnel plug, fixed with elastic bands, and the vent valve will automatically open to release pressure when the pressure exceeds 1 psi.
order No | describe | Weight kg |
FR435SS | Can hold 1, 2 or 3 60-250ml funnels | 1.4 |
FR600SS | Can hold two 125-500ml funnels | 1.8 |
Loading bracket for separating funnel (1000 ml&larger)
Used to install a 1-liter or 2-liter separating funnel, it can rotate from the vertical position to the 45 or 60 position for oscillation and then return to the vertical position for liquid addition or extraction. Need to use the universal installation platform BT6000
order No | describe | Size (mm) | Weight kg | |
BT2000S | 2-liter separating funnel support bracket (requires universal installation platform BT6000) | 317h x 241w x 139d | 1.4 | |
BT1000S | 1-liter separating funnel support bracket (requires universal installation platform BT6000) | 285h x 241w x 139d | 1.4 | |
R80 258 | Funnel lid with a maximum capacity of 1 liter | 0.2 | ||
R80 2552 | 2-liter funnel lid | 0.2 |
Cone shaped bottle support bracket
You can install 1 to 4 conical bottles at once. You can use a conical bottle without a lid (soft oscillation), or you can use a threaded or conical lid. An elastic band can fix the bottle cap. Up to two load-bearing brackets can be used at a time, and the locking knob fixes the brackets in the optimal position for easy installation and oscillation. The bracket can rotate 180 degrees during installation Each bracket can accommodate 3 500 ml or 4 125 ml or 250 ml conical bottles, or can be installed in size combinations.
order No | describe | Size (mm) | Weight kg |
EF521 | Erlenmeyer flask holder | 203h x 323w x114d | 2.4 |
Fat extraction tube bracket
This bracket can be used for Mojonnier fat extraction with a desktop oscillator Each bracket can accommodate up to 4 containers with a diameter of 37 mm. A maximum of 2 brackets can be installed per unit The maximum load-bearing capacity is 2.3 kg, and no additional balancing material is required Containers without bottle stoppers can oscillate up and down. When oscillating horizontally, bottle stoppers need to be used and fixed with their own fixators
order No | describe | Size (mm) | Weight kg |
MFG3 | Fat extraction tube bracket | 222h x330w x114d | 0.9 |
Test tube rack oscillation head
The test tube rack can oscillate one or two entire test tubes at the same time Can be used for bottles, conical bottles, or other containers with stoppers The test tube rack is fixed with a fixture If the bottle stopper becomes loose during installation, this fastener will automatically keep the lid tight The existing test tube rack 12 "x 5" (30.5 x 12.7 cm) can hold stoppered test tubes ranging from 75 to 200 mm in length
order No | describe | Size (mm) | Weight kg |
TR700 | Test tube rack oscillation head | 292h x 336w x 171d | 1.5 |
Universal installation platform
The universal installation platform is used to install BT series glassware support brackets It also includes a platform that can install various containers that require oscillation Easy to install on top of the oscillating head, secured with three fastening screws The BT series bracket can also be easily installed on the reserved mounting holes on the platform Two screws fix one bracket, and one platform can only hold up to two brackets
order No | describe | Weight kg |
BT6000 | Universal installation platform | 1.8 |
Big Three Claw Clamp
The large three jaw clamp can be used on a desktop oscillator Can hold various 3-1/2 "(89 mm) diameter glassware The fixture can be adjusted to the most effective oscillation angle. Can be ordered separately.
order No | describe | Weight kg |
344 | Big three claw clamp | 0.5 |
Centrifugal tube bracket
Centrifugal tube supports can oscillate vertically to release gas or vertically oscillate containers with plugs Each bracket can accommodate 8 centrifuge tubes, and 3 brackets can be installed simultaneously, with a maximum load capacity of 2.3 kg. Please refer to the table below for selection, as different requirements require customization
order No | describe | Size (mm) | Weight kg |
SR815 | 15 ml glass centrifuge tube, maximum diameter of 16 mm, test tube length of 126-160 mm (with stopper) | 228h x 165w x 114d | 0.6 |
SR850 | 50ml glass centrifuge tube, maximum diameter of 28mm, test tube length of 140-180mm (with stopper) | 228h x 165w x 114d | 1.0 |
Three claw clamp
Three jaw fixed clamp, universal fixture, PVC clamp mouth, adjustable upper and lower fixing claws, suitable for fixing objects of different sizes.
The three claw clamp can be used on a desktop oscillator Can hold glassware with a maximum diameter of 80mm The fixture can be adjusted to the most effective oscillation angle. Up to 6 triangular claws can be installed.
Fixture specifications | Maximum extension length (mm) | Maximum straightness of clamped object (mm) | order No |
large | 270 | 80 | KA00-52 |
medium-sized | 245 | 60 | KA00-53 |
small-scale | 210 | 30 | KA00-54 |
large | 615(Rod:500) | 80 | KA00-52A |
Online inquiry