After purchasing the ribbon mixer, we need to debug it. The initial debugging is related to whether we can achieve the appropriate mixing effect when using the mixer to mix materials in the future. Therefore, we need to operate the mixer carefully during the initial debugging. There is a set of operating rules for the debugging method of the mixer.
To ensure that the power supply connected to the mixer meets the requirements, it mainly depends on its voltage; After connecting the power supply and starting the equipment, observe whether the direction of rotation of the winch in the mixer is correct. If it is opposite to the standard, replace the motor wiring; At the same time, it is necessary to ensure that the equipment does not make any abnormal noises during operation, and then proceed with the mixing process of any materials. If the initial mixing effect is poor, it can be adjusted by replacing the sieve with a different aperture. In addition, the suction amount of the material can be adjusted by simply adjusting the distance from the bottom edge of the suction nozzle to the material pit, and the effect will be significantly improved.
After the initial successful debugging, everyone can use the mixer with confidence in the later stage.