productmodel: DSM-SD-4000

Working temperature range: RT-100 ℃Operating voltage: 415V/50HzTemperature control accuracy: ± 1 ℃ Heating power:Heating tube 9KW+9KW/divided into 3 groups for control

Blast power: 750W/4150V * 1 set

Specifications and dimensions:

Dimensions inside the heating box:2000×1060×350Machine conveyor belt space height L x W x H (mm)

Conveyor belt size:4000×1000×750Conveyor belt to ground height L x W x H (mm)

Overall dimensions of the machine:4000×1260×1350 Overall height of the machine (including motor)Length L x Width W x Height H (mm)

Material for box production:

Overview of Machine Structure:This product adopts two sides of air outlet and a middle return air circulation. It uses a PTFE conveyor belt, which is relatively flat and has a feeding section1000mmThe middle heating and drying section is:2000mmThe discharge section behind is:1000mmThe heating element is installed in the top air duct of the oven, and the near-infrared electric heating tube+The combination of near-infrared quartz heating tube and circulating motor installed on the top of the oven can extend the service life of the motor. The inlet and outlet are equipped with adjustable stainless steel baffles.

Outer wall material of the box: A3 carbon steel cold rolled plate, sheet metal, bent welding, rivet splicing.

Material of box air plate: SUS20 # mirror stainless steel plate sheet metal bending machine punching.

Box frame material: A3 carbon steel cold rolled plate, sheet metal bending and weldingmake.

Box tripod material: made of national standard square tube

Insulation layer thickness material: filled with 100K grade high-density aluminum silicate fiber (insulation layer thickness of 100mm).

Outer box coating material: After rust proof phosphating treatment, the surface is sprayed with plastic, and the color is blue and white

Transmission power system:

Transmission power: 1 gear speed regulating motor is used, with a speed range of 500mm-3000mm/min.

Conveyor drum: adopts self correcting drum, which can be adjusted left and right for correction.

Variable frequency drive: using a variable frequency speed controller

Conveyor belt: Made of PTFE conveyor belt, relatively flat and easy to clean.

Intake and exhaust:

Air intake: 1 hole diameter of 60mm. Located next to the circulating motor, it serves as a compensating inlet for cold air.

Exhaust: 1 adjustable butterfly valve exhaust port to remove baking exhaust gas

Circulating system:

Blowing method: high-pressure circulating air

Motor device: 1 750W long shaft motor installed on the top of the box

Heating system:

Heating element:Adopting a nested designUStainless steel tubular electric heating generator with infrared heating tube,0.75KW/Item, overall24Item, total power of heating element18KW, divided3Group heating switch（1group9KWinfrared+2group9KWElectric heating tube),Continuous service life can reach5Over 10000 hours

Heating time:The heating rate is required to be above 2 ℃/minute and cannot exceed 10 ℃/minute. Raise the temperature from room temperature to 60 ℃ for no more than 10 minutes, and from room temperature to 200 ℃ for no more than 30 minutes.

Electrical configuration:

Sound and light alarm device: APT/AD16 type sound and light alarm device, set time end alarm prompt.

Control circuit voltage: 220V/50Hz

Temperature measuring device:2Stainless steel armorPT100Resistance temperature sensing device, precise temperature measurement±1℃.

Transformer device:A set of high-power transformer equipment

Protection system: leakage protection, circuit breaker protection, motor overload protection, grounding protection, over temperature protection.

Circuit breaker activation: Circuit breakers with leakage protection are activated to effectively protect all electrical components.

Electrical components: use branded electrical products

Note: Tunnel ovens (assembly line ovens) are mainly non-standard, and the above cases are for reference only. Detailed requirements need to be discussed before designing more reasonable products. Welcome to call or contact us for detailed communication!