LLOYDOverview of Lloyd's tensile testing machine (all models within the load range of 5kN-50kN):

The LLOYD Lloyd tensile testing machine is designed for routine quality control and the execution of complex multi-stage tests. The machine uses XLC series force sensors for tensile, compressive, and cyclic measurement tests starting from zero load.

The LLOYD Lloyd tensile testing machine is controlled by a microprocessor and combined with 32-bit technology for load measurement and data acquisition. It has an integrated console with a film style multifunctional keyboard and a backlit LCD display screen to display test and setup information. The console displays prompts and menus to guide users in operating the machine, as well as language and measurement units for users to choose from.

The steel frame is combined with a crossbeam guidance system to prevent the test sample from being affected by lateral loading.

An independent system can store up to 600 test results selected from 10 programmable test settings. The simple and easy-to-use NEXYGENPlus material testing and data analysis software can be used to optimize machine performance, which has result processing capabilities. Experimental information can be easily exported to Microsoft ® Products such as Word Excel ® And Outlook ®。

LLOYDThe main features of Lloyd's tensile testing machine are:

1. Easy to install, operate, and maintain
2. Use XLC series force sensor (reading 0.5%)
3. The data sampling rate is 8kHz
4. Store up to 600 test results
5. 10 programmable experimental settings
6. Backlit LCD display with intuitive user interface
7. Standard multilingual and multi unit display options
8. Flash memory upgradable
9. Can be installed on compression cages standing on the ground for testing large samples/integral assemblies
10. Fully integrated with PC installed with NEXYGENPlus material testing and data analysis software (certified by ISO TickIT).

LLOYDPerformance commonalities of Lloyd's tensile testing machines (all models within the load range of 5kN-50kN):

The LLOYD Lloyd tensile testing machine is suitable for routine quality control tests or complex multi-stage tests, and can perform tensile, compression, bending, peeling, shear, friction tests, and more. They are flexible, easy to use, and easy to maintain, capable of data acquisition at a rate of 8kHz. The independent system can store 600 test results from 10 programmable test settings. In addition, when integrated with a PC installed with Lloyd Instruments' NEXYGENPlus material testing and data analysis software, it can perform data analysis.

LLOYDPerformance differences of Lloyd's tensile testing machine (all models within the load range of 5kN-50kN):

LR5KPlus 5 kN (1124 lbf)

• Beam travel is 975 mm (38.39 in)
• Available expansion models with a travel of up to 1460mm (57.48 in)
• The speed range is 0.01-1020 mm/min (0.004 to 40.16 in/min)

LR10KPlus 10 kN (2248 lbf)

• The travel of the crossbeam is 950 mm (37.4 in)
• Available expansion models with a travel of up to 1465 mm (57.68 in)
• The speed range is 0.01-510 mm/min (0.004 to 20.08 in/min)

EZ20 20 kN (4496 lbf)

• The travel of the crossbeam is 870 mm (34.25 in)
• The speed range is
• Load up to 20KN: 0.01-500 mm/min (0.004 to 19.68 in/min)
• Load up to 10KN: 0.01-1020 mm/min (0.004 to 40.16 in/min)

LR30KPlus 30 kN (6744 lbf)

• The travel of the crossbeam is 870 mm (34.25 in)
• Available expansion models with a travel of up to 1350 mm (53.15 in)
• The speed range is 0.01-510 mm/min (0.004 to 20.08 in/min)

LR50KPlus 50 kN (11241 lbf)

• The travel of the crossbeam is 855 mm (33.66 in)
• Available expansion models with a travel of up to 1520 mm (59.84 in)
• The speed range is 0.01-510 mm/min (0.004 to 20.08 in/min)

EZ50 50 kN (11241 lbf)

• The travel of the crossbeam is 855 mm (33.66 in)
• The speed range is 0.01-510 mm/min (0.004 to 20.08 in/min)