ADP-511S has been discontinued, alternative model: ADP-611
Karl Fischer Moisture Analyzer - Karl Fischer Moisture Heating Furnace ADP-611

Karl Fischer moisture analyzer-Moisture evaporator ADP-511S

Heat the sample in a dry nitrogen or air stream to vaporize the moisture, capture it in the titration solvent or electrolyte, and perform Karl Fischer titration. Choose one of the volumetric titration method or coulombic titration method according to the water content.

Karl Fischer Moisture Analyzer - Moisture Evaporator ADP-511S Main Features:

1. Connect the Karl Fischer moisture analyzer and control the operating program with the Karl Fischer moisture analyzer.
2. Suitable for moisture determination of plastic particles or solid samples.
3. Use an automatic Karl Fischer heating furnace to automatically feed the sample into the furnace.
4. The transparent heating glass tube can observe the heating and evaporation process of the sample.
5. The Kashgar heating furnace precisely controls the heating temperature and gas flow rate.

Karl Fischer Moisture Analyzer - Moisture Evaporator ADP-511S Technical Parameters:

Temperature control range: room temperature to 300 ° C.
Heater device: Pyrex glass tube, inner diameter 30, length 270mm.
Carrier gas transportation: 1) Nitrogen gas, 2) Air pump (additional accessories to be purchased).
Carrier gas drying: Silica gel desiccant X1, zeolite desiccant X1.
Carrier gas flow rate: 100-300 mL/min.
Power Supply: AC100-120/200-240, 50/60Hz。