Kane KM950 Handheld Smoke Analyzer-Fornitore globale

Product Groups

Firm Information

Contact Now

Kane KM950 Handheld Smoke Analyzer

Product details

Kane KM950 Handheld Smoke Analyzerbrief introduction

Suitable for boiler combustion testing and pollution emission monitoring

Handheld, fully displayed in Chinese, easy to operate and convenient for on-site use

It can measure O2 SO2、NO、NO2、CO、 Flue gas temperature, ambient temperature, flue gas pressure, overall efficiency

Automatically calculate the flow rate of flue gas CO2、NOx、 Net efficiency, total loss, net loss, excess air coefficient

Built in dual head powerful vacuum pump ensures normal operation under high negative pressure and fast response time

Flexible combination of CO, SO2, NO, NO2 sensors, easy to upgrade

The results show that the conversion between percentage concentration, ppm, and mg/m3 is arbitrary

The measurement alarm limits for different gas components can be set separately

The internal special gas path design greatly reduces the loss of SO2 and NOx during testing

Automatically correct sensor cross interference based on smoke status

The large screen display and backlight function facilitate the normal use of the instrument in dim conditions

By measuring pressure, the flow rate of the flue gas is directly displayed

After booting up, you can directly enter the testing interface without pressing any keys, which is simple and convenient

Dual use of AC and DC, capable of continuous operation for 6 hours on a full charge

Data storage function

Infrared remote control printing method

Built in automatic calibration program facilitates users to calibrate themselves

Users can customize the printing content

Kane KM950 Handheld Smoke Analyzerparameter

parameter	resolution	accuracy	range	describe
Flue temperature	0.01ºC	0.01 ℃± 0.3% reading	0-1200ºC	>Using a high-temperature probe at 600 ℃
ambient temperature	0.01ºC	0.01 ℃± 0.3% reading	-50℃～50℃
pressure	1pa	± 2.0% reading	±15000pa	Over range ± 25000pa
Gas measurement
O2	0.01%	± 0.2% reading	0-25%	Except for O2 (which is a mandatory test item), users can choose 1-3 sensors from SO2, NO, NO2, and CO according to their needs. The measurement range can also be selected, but it is not possible to select the same sensor for two concentrations at the same time.
CO	1ppm	± 5% reading	0-10,000ppm
NO (standard range)	1ppm	± 5% reading	0-5000ppm
NO (low range)	1ppm	± 5% reading	0-200ppm
NO2	1 ppm	± 5% reading	0-1000ppm
SO2 (standard range)	1ppm	± 5% reading	0-5000ppm
SO2 (low range)	1ppm	± 5% reading	0-200ppm
Automatic calculation
CO2	0.1%	± 0.3% reading	0-99.9%
NOx	1ppm	± 5% reading	0-6000ppm
loss	0.1%	± 1.0% reading	0-99.9%
Combustion Efficiency	0.1%	± 1.0% reading	0-99.9%
Excess air coefficient	0.1%	±0.2%	0-2885.0%
Net temperature	0.01ºC	0.01 ℃± 0.3% reading	0-1200ºC
Smoke velocity	±0.1m/s	± 2.2% reading	2-45 m/s	Calculate based on flue pressure and temperature

Online inquiry