*This product is an intelligent isolation transmitter for comprehensive measurement of electricity, which can perform full parameter measurement on AC single-phase/three-phase circuits

*Measure various parameters such as voltage, current, frequency, active power, reactive power, power factor, and cumulative electricity

* Adopting high-precision 24 bit dedicated AD chip, with a dynamic range ratio of up to 1000:1

*Fully isolated processing technology with strong anti-interference ability

*Remote transmission of measured electrical parameters through RS485 digital interface output

*Compact structure, rail type (or screw type) installation

*Suitable for fields such as power, computer room monitoring, industrial measurement, etc

*Measurement range: AC 0~500V*700A

* Accuracy level: 0.5% F.S

*Response time: 100ms

*Overload capacity: 2 times the voltage for 1 second, with an interval of 10 seconds, repeated 10 times; 10 times current (perforated only) for 1 second, with an interval of 300 seconds, repeated 5 times

*Temperature coefficient:≤300ppm/℃(0~50℃)

*Bus protection function: capable of withstanding instantaneous pulse voltage of 400W

*Maximum number of communication nodes: 64

*Frequency response range: 45~65Hz

*Isolation withstand voltage: ≥ 2.5KVDC/1min (between power supply/input/output)

*Work environment:- 10-60 ℃, 20-90% RH (no condensation)

*Working power supply: DC 12V, 15V, 24V or AC 220V (optional)

*Whole machine power consumption: ≤ 500mw(DC 24V)

Note: The above is the wiring diagram and dimension diagram for a 6.5mm aperture. For wiring diagrams and dimension diagrams for other apertures, please refer to the accompanying drawings