The high and low temperature test chamber adopts an original imported thin touch button human-machine interface temperature controller and an original imported fully enclosed compressor. The overall performance is stable, the operation is simple, and the installation is easy. The control technology has reached the current international advanced level, and the cost-effectiveness is significantly better than similar imported equipment. It is an ideal equipment for high and low temperature alternation.

This equipment meets the requirements of Test A: Low temperature Test Method and Test B: High temperature Test Method in GB2423.1-89 Basic Environmental Test Regulations for Electrical and Electronic Products

Temperature regulation method BTHC (balanced temperature regulation method)

Nickel chromium alloy electric wire heater

Blower centrifugal fan

Temperature sensor PT100 dry ball sensor

Performance temperature range of high and low temperature test chamber

Temperature: -40~+150 degrees

Temperature fluctuation: ± 0.5 degrees

Heating time: -40~+150 degrees, less than 70 minutes

Cooling time:+20~-40 degrees, less than 60 minutes;

Working environment temperature: between+5 and+35 degrees Celsius

Power supply: 2 ф 3W220VAC ± 10%

Power cord 4.0 mm 2x4 cores, low impedance rubber cable 2.5m long, 1 pieceOne RS-232C communication interface terminal (9PIN)Stainless steel SUS # 304 square punched steel plate storage rack 2 piecesStainless steel adjustable spacing 40mm storage rack track 2 setsOne 11W energy-saving lighting window lamp

On the left side of the body, there is one test hole with a diameter of 50mm and one stainless steel hole cover, as well as one silicone plug. 、A set of fuses (consumable parts)One set of controller user manual, one set of operation manual, and one test report

Dongguan Jiuxing Electronic Technology Co., Ltd

Mr. Cao:

Phone: 0769-

Fax: 0769-

www.gaodiwenxiang.com

www.jx18.com.cn