1、 Product performance

JX-8800SJ reverse osmosis membrane fungicide is a specialized fungicide for reverse osmosis systems, which can quickly achieve bactericidal effects at low doses. This product has a strong penetration ability into microbial cells and has a destructive effect on microbial cell tissues. It also has a strong killing and inhibitory effect on bacteria, fungi, algae, and other microorganisms in reverse osmosis equipment. Frequent use of this product can effectively control microbial contamination in reverse osmosis systems, especially in surface water systems.

Product Features

1. Non oxidizingbactericideRapid and effective bactericidal effect, with no oxidative damage to the membrane;

2. Has a certain peeling effect on the sticky mud formed by bacteria;

3. Compatible with all membranes;

4. Wide range of applicable pH, good biodegradability, and no environmental pollution;

5. Convenient use of liquid products;

2、 Technical indicators

3、 Usage method

There are two ways to use special fungicides for reverse osmosis:

1Online investmentUsing 400ppm for 30 minutes every 10-15 days in an impact manner can gradually and slowly destroy the biofilm scale that has already formed on the surface of the RO membrane, causing it to fall off and be discharged from the system with concentrated water; This method is an effective supplement to daily continuous sterilization, especially during high temperature seasons and periods of vigorous growth of bacteria and algae. It is a very effective treatment method to add the original solution to the suction well of the raw water pump or to add the original solution to the inlet pipe of the mechanical filter through a metering pump.

2. Offline AddStop the operation of the RO system, prepare a sterilization solution through chemical cleaning, and circulate the liquid medicine to treat the system. If the system is severely contaminated, it should be chemically cleaned on site first, and then sterilized according to the following steps:

1) Add water to the cleaning tank and prepare a disinfectant concentration of 400-800ppm; 2) Adjust the pH of the cleaning solution to below 7 (citric acid or hydrochloric acid can be used to prolong the half-life of LSB881); 3) Cycle for 45 minutes.

4、 Packaging and Storage

Packaged in plastic drums, each weighing 25kg or determined according to user needs. Store in a cool and ventilated place indoors, with a shelf life of two years.

5、 Safety and Protection

Has a certain degree of irritation to the skin, protective equipment should be worn during use to prevent splashing onto the eyes or skin. If it splashes onto the eyes or skin, it should be washed with water immediately.