VIP member
JC-LQM-4 vertical planetary ball mill
JC-LQM-4 Vertical Planetary Ball Mill Product Name: JC-LQM-4 Vertical Planetary Ball Mill Order Number: TR-0014 Model: JC-LQM-4
Product details
-
1、 Product Introduction
JC-LQM-4 vertical planetary ball mill is an indispensable device for mixing, fine grinding, sample preparation, nano material dispersion, new product development, and small-scale production of high-tech materials. This product has a small volume, comprehensive functions, high efficiency, and low noise. It is an ideal equipment for scientific research institutions, universities, and enterprise laboratories to obtain micro particle research samples (four samples can be obtained at the same time in each experiment). Equipped with a vacuum ball milling tank, the sample can be ground under vacuum. Widely used in geological, mineral, metallurgical, electronic, building materials, ceramics, chemical, light industry, medicine, beauty, environmental protection and other sectors. The rotational speed, alternating time between forward and reverse rotation, and total grinding time can be set according to the process requirements.
working principle:
The JC-LQM series ball mill is equipped with four ball milling tanks on the same turntable. When the turntable rotates, the ball milling tanks revolve around the turntable axis while also rotating around their own axis, performing a planetary motion. The grinding balls in the tank collide with each other in high-speed motion, grinding and mixing samples. This product can be ground and mixed with different particle sizes and materials using both dry and wet methods. The minimum particle size of the ground product can reach 0.1 microns (i.e. 1.0 × 10mm-4).
2、 Product parameters3、 Product FeaturesProduct Name
Planetary ball mill
model
LQM-4
Grinding tank volume (ML)
0.25~1L
Grinding tank material
Corundum ceramics.steel tank
Grinding material
Zirconia sphere.Stainless Steel Ball
Maximum loading capacity per can
Materials and grinding media shall not exceed two-thirds of the volume
Feed particle size
Crispy materials less than 10mm, others less than 3mm
Discharge size
Minimum can reach 0.1 micrometers
rotational speed
Maximum revolution speed of 35-335r/min, rotation speed of 70~670 r/min
Speed ratio (revolution: rotation)
1:2
Speed Control
Frequency Control
Transmission mode
gear drive
working voltage
220V
Motor power and variable frequency power
0.75Kw
way of working
Two or four tanks working simultaneously
Maximum continuous working time
72 hours (timer 0-9999h)
Program control
The ball mill is controlled by a high-tech microcomputer chip and can operate alternately in forward and reverse directions according to the set program (1-999min), as well as in forward, pause, reverse, pause, and forward directions (1-999min). It is particularly suitable for cooling or intermittent operation needs.
1. Gear transmission overcomes the disadvantage of easy slippage and unstable speed of the original belt transmission;
2. It not only maintains the stability of gear transmission, but also overcomes the disadvantages of easy slippage and unstable speed of the original belt transmission.;
3. The ball milling jar adopts planetary motion, with high ball milling efficiency and fine particle size;
4. Variable frequency control, which can select the ideal speed based on the test results;
5. The frequency converter has undervoltage and overcurrent protection, which can provide some protection for the motor;
6. The integrated system has functions of timed shutdown, automatic timed forward and reverse rotation, and can freely choose one-way, alternating, continuous, timed and non timed operation modes as needed to improve grinding efficiency;
7. One experiment can simultaneously obtain four samples of different sizes and materials;
8. Low center of gravity, stable performance, compact structure, easy operation, safe and reliable, low noise, no pollution, and low loss;
9. The equipment is equipped with a safety switch, which can prevent the equipment from starting when the safety cover is opened, thus avoiding safety accidents;
Juchuang Environmental Protection provides you with comprehensive technical support and perfect after-sales service! Details consultation:!
-
1. Gear transmission overcomes the disadvantage of easy slippage and unstable speed of the original belt transmission;
2. It not only maintains the stability of gear transmission, but also overcomes the disadvantages of easy slippage and unstable speed of the original belt transmission.;
3. The ball milling jar adopts planetary motion, with high ball milling efficiency and fine particle size;
4. Variable frequency control, which can select the ideal speed based on the test results;
5. The frequency converter has undervoltage and overcurrent protection, which can provide some protection for the motor;
6. The integrated system has functions of timed shutdown, automatic timed forward and reverse rotation, and can freely choose one-way, alternating, continuous, timed and non timed operation modes as needed to improve grinding efficiency;
7. One experiment can simultaneously obtain four samples of different sizes and materials;
8. Low center of gravity, stable performance, compact structure, easy operation, safe and reliable, low noise, no pollution, and low loss;
9. The equipment is equipped with a safety switch, which can prevent the equipment from starting when the safety cover is opened, thus avoiding safety accidents; -
Product Name
Planetary ball mill
model
LQM-4
Grinding tank volume (ML)
0.25~1L
Grinding tank material
Corundum ceramics.steel tank
Grinding material
Zirconia sphere.Stainless Steel Ball
Maximum loading capacity per can
Materials and grinding media shall not exceed two-thirds of the volume
Feed particle size
Crispy materials less than 10mm, others less than 3mm
Discharge size
Minimum can reach 0.1 micrometers
rotational speed
Maximum revolution speed of 35-335r/min, rotation speed of 70~670 r/min
Speed ratio (revolution: rotation)
1:2
Speed Control
Frequency Control
Transmission mode
gear drive
working voltage
220V
Motor power and variable frequency power
0.75Kw
way of working
Two or four tanks working simultaneously
Maximum continuous working time
72 hours (timer 0-9999h)
Program control
The ball mill is controlled by a high-tech microcomputer chip and can operate alternately in forward and reverse directions according to the set program (1-999min), as well as in forward, pause, reverse, pause, and forward directions (1-999min). It is particularly suitable for cooling or intermittent operation needs.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-