JB-TS3 type molten iron carbon silicon analyzer, also known as furnace front molten iron composition analyzer, is widely used for on-site measurement of main indicators such as carbon equivalent, carbon content, silicon content, pouring temperature TM, liquidus temperature TL, solidus temperature TS in raw iron water such as gray iron, ductile iron, creep iron, and low-alloy cast iron.

This product, also known as the furnace front molten iron composition analyzer, is widely used for on-site measurement of main indicators such as carbon equivalent, carbon content, silicon content, pouring temperature TM, liquidus temperature TL, and solidus temperature TS in raw iron water such as gray iron, mare iron, ductile iron, creep iron, and low-alloy cast iron.

Product features:

1. The measurement results are directly read by digital display, and the measurement time is 2-3 minutes, which is convenient for casting engineers to mix materials on site.

2. The instrument is easy to operate, maintenance free, and can be used on site by ordinary furnace workers.

3. The instrument is portable and can be freely moved on the stove table. Multiple stoves can use one instrument at the same time.

4. Eliminate product quality accidents, reduce waste recycling, and lower production costs.

5. The instrument can measure molten iron before or after incubation.

6. The instrument can automatically control important metallurgical parameters. It automatically measures gray white solidified cast iron, eliminating manual operation. Can connect large remote displays, signal lights, computers, and printers.

1. Measurement parameters:

Measure carbon content, silicon content, carbon equivalent CEL, undercooling △ T, large undercooling △ TM, tensile strength Rm, hardness HB, quality factor R/H, number of agglomerates MEG, graphitization factor K, pouring temperature TM, liquidus temperature TL, and solidus temperature TS.

2. Measurement range: According to ICEC584, model K (Nicr Ni) 200 ℃ -1370 ℃ C: 2.1-4.2% Si: 0-20%

CEL:2.5-5.0

3. Accuracy:< ±℃ CET±0.047% C±0.04% Si±0.1%

4. Display: 4-digit LED display number 560mm Resolution: 1 ℃

5. Operation mode: Select the required parameters with 9 buttons, among which the "Auto" button is for cyclic display. Carbon and silicon elements can be adjusted for precision through panel knobs.

6. Output mode: 4-20mA

7. Dimensions: Length: 380mm, Width: 290mm, Height: 120mm8. Working power supply: AC: 220V ± 10% 50HZ Power: 10VA-35VA Environmental temperature: 0 ℃ -50 ℃

Application planUsed for rapid measurement of the main components in molten metal during the smelting process in industries such as smelting and casting, to quickly guide pre furnace work.