Intelligent softening water equipmentAs the name suggests, it is a device that reduces the hardness of water, mainly removing calcium and magnesium ions and descaling. When the inlet water is deep well water or the water source has a high hardness, the function of using a softening water device is to remove the calcium and magnesium ion content in the water, reducing the calcium and magnesium ions in the water.

The equipment is installed indoors. To prevent component corrosion, the ambient temperature should be above zero degrees Celsius, without steam, and in a dry place

Characteristics of Intelligent Softening Water Equipment:

1. Low cost and versatile.

2. Automatic operation, stable water output.

3. Reliable performance.

4. The whole machine leaves the factory, easy to install, and compact in structure.

5. Corrosion resistance and pollution resistance.

6. High efficiency and low energy consumption.

The equipment is installed indoors. To prevent component corrosion, the ambient temperature should be above zero degrees Celsius, without steam, and in a dry place

Use and maintenance of intelligent softened water equipment:

The quality of raw water should meet the requirements of general softened water treatment equipment; The equipment should be installed indoors to prevent component corrosion. The ambient temperature should be above zero degrees Celsius, without steam, and in a dry place; After the equipment is in place, fix all bolts and tighten them again. The enclosure of the distribution panel should be grounded; The upper and lower bolts of the lever fixing block on the rotary valve should not be loose, and the exchange column should not be impacted; Time relay, do not adjust during operation. When repairing and scrubbing equipment, the power must be cut off to prevent water from entering the motor, distribution panel, limit switch, etc; Operation, simultaneous water and power supply. When shutdown, both water and electricity are turned off; Regularly keep the equipment clean, avoid running low on oil in the refueling section, and be careful not to touch the pulley during operation to avoid accidents.