Brief introduction
Magnetic flap level gauges can be used for medium level detection in various equipment such as towers, tanks, spherical containers, and boilers. This series of magnetic level gauges can achieve high sealing, leak prevention, and adapt to liquid level measurement under high pressure, high temperature, and corrosive conditions, with reliable safety. It makes up for the shortcomings of glass plate (tube) level gauges, such as unclear indication and easy breakage, and is not affected by high and low temperature fluctuations, without the need for multiple sets of level gauge combinations. The entire measurement process has no blind spots, with clear display, intuitive readings, and a large measurement range. Especially in the on-site indication section, as it does not come into direct contact with liquid media, its superiority is even more evident for high temperature, high pressure, high viscosity, toxic and harmful, and highly corrosive media. This series of side mounted magnetic flip column level gauges can be widely used for level measurement and control in various industries such as power, petroleum, chemical metallurgy, environmental protection, shipbuilding, construction, and food production processes.
2、 Product Features
1. Compared with traditional glass tube, plate level gauge has higher reliability, safety, progressiveness and practicability.
The most significant feature of the side mounted magnetic flap level gauge is that the liquid medium is completely isolated from the indicator, making it very safe, reliable, and durable in any situation. Moreover, various models of level gauges are equipped with level alarms and control switches, which can achieve upper and lower limit alarm, control, or interlocking of the liquid level or boundary.
3. Equipped with a static pressure level transmitter or a dry spring resistance level transmitter, the liquid level and boundary signals can be converted into a two-wire 4-20mADC standard signal, enabling remote indication, detection, recording, and control.
3、 Technical parameters
1. Measurement range: 300mm to 6000mm (>6000mm)
2. Installation form: side installation, top installation, bottom installation. Please specify when ordering
3. Body material: stainless steel, engineering plastic, fiberglass, polytetrafluoroethylene, 316, etc
4. Instrument structure: side mounted, top mounted, and insulation jacket type
5. Display mode: 1. On site direct reading; 2. Upper and lower limit alarm (output signal: normally open or normally closed);
6. Remote transmission: output signal 4-20mA
7. Connection methods: threaded connection, flange connection, etc
8. Medium temperature: -20 ℃~80 ℃, 80 ℃~480 ℃
9. Measurement accuracy: ≤± 10mm
10. Medium density: Liquid level: ρ≥ 0.5g/cm3 Boundary: ρ 1- ρ 2 ≥ 0.25g/cm3
11. Nominal pressure: 0-2.45Mpa, 2.45Mpa -9.6Mpa
12. Protection level: IP65
13. Power inlet: M20 × 1.5 (internal thread)
14. Explosion proof form and mark: explosion-proof type dIIBT4。