Operation mode: There is a atomizer with two streams injected into the nozzle and a barrier

Particle size,d_mode：0.2~0.3Microns（DES）

Particle concentration:>10⁸/cm³

Particle type

Liquid:DES(Non toxic),DOP，PAOParaffin wax

Solid:PSLRubber particles, sodium chloride, other salt solutions

Current Speed:1.2~5.0 L/min

Maximum backpressure:10kPa（0.1bar）

Dimensions (length, width, height):30cm*12cm*19.5cm（11.8in*4.7in*7.7in）

Weight:4.8kg（10.6b）

Required battery level:12 VDirect current can be provided through a power supply device (standard)ECAdapter)

Power supply:110/240 Valternating current

3079A Integrated Atomizing Aerosol Generator

A spray capable of producing multi dispersed and high concentration test aerosol

Model 3079A is a new product and an innovative aerosol spray generator, which can produce particles within the range of micrometer.3079AType Integrated Atomizing Aerosol Generator

Multi dispersed aerosols can be generated by atomizing a solution, or monodisperse particles can be generated by atomizing monodisperse particles in a suspension. The particle size generated by this aerosol generator is between 0.2 and 0.3 microns; In addition, the flow through the spray can be adjusted to change the particle concentration. The aerosol spray generator adopts a compact, rough surface design and is convenient to carry. A built-in low-noise compressor can provide necessary compressed air for the atomization process. The 3079 aerosol spray generator uses a new type of all stainless steel nozzle, and the nozzle and the glass container with solution are protected by an easy to open hinge cover.

3079A Integrated Atomizing Aerosol Generator

Compact structure, light weight, easy to carry; Can be used in many situations where a high concentration test aerosol is required.

Filter testing

Particle size testing and evaluation

Track sowing

L Air duct seeding

Laminar flow box test

Acceptance testing

Multi functional aerosol testing product

The aerosol DES test data tested by 3079 aerosol spray generator and the particle size random scan test chart of TSI 3936 series (ordinate: concentration, cm3; Horizontal axis: Particle diameter: Nano)

3079A Integrated Atomizing Aerosol Generator

A stainless steel compressed air atomizer was used, which has two streams injected into the nozzle to produce a dispersed aerosol. The built-in compressor in the generator can provide the required compressed air. Among them, flow meters equipped with needle shaped valves can also provide users with the ability to set flow rates; The operator can also easily change the particle concentration by adjusting the valve. Compressed gas needs to pass through an efficient filter, where pollutants in the compressed air flow are removed. Then, the compressed air expands through the nozzle of the spray to produce a high-speed jet flow. Under the influence of Bernoulli effect, the moisture in the storage container is extracted. As a result, a high-speed airflow breaks through the solution and turns it into droplets suspended in the airflow. At this time, the container wall of the spray acts as a barrier to the wall. Large droplets collide with the container wall and are removed from the airflow. This can make the final particle size less than 1 micron. The fine aerosol flows out of the 3079A integrated atomizing aerosol generator through the outlet at the top of the spray..