Ingersoll RandMSeries screw air compressor

Excellent host design

The core of Ingersoll Rand screw air compressor micro oil type is our sturdy and reliable host. Our compressor mainframe has been applied to thousands of compressors around the world, renowned for its zero failure and lowest maintenance costs.

We are the only company that uses the highest quality face-to-face tapered roller bearings on the host. Roller cone bearings bear thrust loads in a linear contact manner, greatly extending the service life of the host. The host is also equipped with a bearing oil groove, which can store coolant when the host is stopped, ensuring that the bearings can be fully lubricated when restarted, thereby extending the life of the bearings.

Unparalleled reliability

Our durable integrated transmission gear is the only transmission system in the industry that does not require maintenance. The position of the host and motor remains permanently coaxial, so there is no need to recalibrate during normal operation.

The entire transmission system is sealed to prevent dust and dirt from entering. And the three lip shaft seal ring can prevent coolant leakage into the motor.

high efficiency motor

Each compressor is equipped with a durable and high-efficiency motor, which operates at full load with the highest efficiency and energy savings.

High temperature resistant design

Ingersoll Rand micro oil screw air compressors can operate stably at ambient temperatures in the vast majority of countries around the world. Past experience has shown that even in regions with relatively mild climates, air compressors are still affected by other heat sources, so Ingersoll Rand is chosen46Units designed for high temperatures can fully adapt to changes in the surrounding environment and will never experience malfunctions or shutdowns due to overheating or high ambient temperatures. Correspondingly, the daily maintenance required is much less than that of traditional design standards for air compressors.

advanceair valve

（1）The geometrically optimized flow channel design ensures the low pressure loss and high efficiency performance of the intake valve during operation;

（2）Adjustable intake bypass design can effectively reduce noise when the air compressor is unloaded;

（3）The design of an integrated control block, controlled by a single solenoid valve, greatly simplifies pipeline design and minimizes the possibility of leakage;

（4）By adjusting the bolts, it is very convenient to regulate the flow rate of discharge and intake, as well as the no-load pressure and venting time;

（5）Fewer vulnerable parts, convenient for after-sales service and maintenance;

（6）High quality component materials ensure extremely high durability.

Separation of oil and gas

It can minimize the oil content in the equipment and reduce the frequency of coolant supply. This design also reduces the impact of excessive or insufficient oil injection in the separator on the oil content of compressed air.

（1）The mixture of oil and gas enters tangentially from the bottom of the separator;

（2）A new baffle mechanism has been installed for the oil;

（3）Oil separation mechanism: centrifugation, coagulation, interception;

（4）The oil content of compressed air after triple separation is lower than2PPM.

Unique cooling method

The aftercooler is installed at the intake end of the unit, which ensures that the temperature of the compressed air after cooling is only higher than the ambient temperature15℉/8℃, and then enter the gas system after post-treatment.

Gas water separator

（1）Standard air-water separator;

（2）Higher air quality;

（3）Reduce the workload of the post-processing system and achieve greater energy efficiency.

Leading coolant solutions-Ultra ELUltra Coolant

（1）16,000hour/3Years of lubricating oil service life;

（2）Excellent cooling performance;

（3）Effectively reduce wear and tear;

（4）Powerful corrosion inhibition effect;

（5）Better separation efficiency.

Microcomputer intelligent controller

（1）The microcomputer intelligent controller is very easy to master and operate;

（2）With the microcomputer intelligent controller, the operating parameters can be adjusted to the machine;

（3）The optimal state required for group operation;

（4）Optional Chinese display controller for easier understanding.

Electric control panel

（1）Electrical protection levelIP55；

（2）Star-triangle(Y- )Switching startup reduces the impact of startup current and lowers the peak startup current to its original value33%；

（3）Provide soft start options;

（4）Extended the lifespan of the motor.

Compressor unit

To meet the requirements of your air compression system, we have two cooling methods for you to choose from: air-cooled and water-cooled.

Convenient service

The internal components of the unit are arranged in an orderly manner and have strong maintainability. After removing the panel, maintenance of all components can be achieved.

Factory testing

In order to ensure that your compressor can achieve optimal performance under various different conditions, we have the most advanced computer testing system, and each compressor must undergo performance testing under different environmental conditions before leaving the factory.

Leak free design

SAEStandard0Type sealing ring can completely prevent leakage.