VIP member
ISM446B gear pump driver with remote control by Ismatec
Realize precise pumping - Three position button potentiometer can be used to set 1000:1 adjustment ratio - Four analog signal ranges and on/off contro
Product details
ISM446B gear pump driver with remote control by Ismatec
Realize precise pumping
The three position button potentiometer can be used to set the 1000:1 adjustment ratio
Four analog signal ranges and on/off control functions enable peripheral instruments to adjust speed and activate drivers (remote cable required)
The electronic feedback system can compensate for load changes to maintain a speed accuracy of ± 1%
Random equipment: used for installing Micropump ® The adapter plate for the standard pump head, a drive magnet, and a 6-ft (1.8-m) power cord with an American standard plug.
Work cycle: Continuous from 1200 to 5000 rpm
Remote control (input)
Speed control: 0-5 or 0-10 VDC; 0-20 or 4-20 mA (DB15 F)
On/off control: TTL contact (DB15F)
Remote control (output): 0-10 VDC or 0-12 kHz (for speed monitoring)
Maximum temperature: 104 ℉ (40 ℃)
Need to use A-Mount pump head together
- Minimum revolutions per minute (rpm) of the motor60
- Maximum revolutions per minute of the motor (rpm)6000
- Type of motor casingTENV, PMDC
- Power (VAC)230
- Power (Hz)50/60
- Continuous work cycleYes, 1200 to 5000 rpm
- Maximum temperature (° F)104
- Maximum temperature (° C)40
- Width (in)9.5
- Width (cm)24.13
- Length (in)6.125
- Length (cm)15.557
- Height (in)10.25
- Height (cm)26.035
- Motor horsepower0.156
For more Cole Parmer products, please contact us.
Telephone:
Email: info@merseylab.com
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-