product overview

Single stage single suction hot water centrifugal pump. It is a new generation of energy-saving research and development based on the ISG type. Environmentally friendly vertical hot water centrifugal polymerization. This series of pumps has excellent aggregation performance. High reliability. Long lifespan. Reasonable structure and beautiful appearance.

Product Features

Smooth operation: The concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation without any vibration.

Drip proof: The hard alloy seals made of different materials ensure that there is no slip or leakage during the transportation of different media.

Low noise: The water pump is supported by two low-noise bearings. Smooth operation. Except for the faint sound of the motor, there is basically no drinking sound.

Low reduction rate: The structure is simple and reasonable, and the key parts are matched, greatly improving the fault free working time of the whole machine.

Easy maintenance: replace seals and bearings. Simple and convenient.

More land saving: the exit can be turned left. towards the right. Up three directions. Easy to arrange and install pipelines. Save space.

application

The IRG type vertical single-stage single suction hot water centrifugal polymerization is suitable for metallurgy. Chemical industry Textile and wood processing Paper making and restaurants. Luoshi High temperature hot water pressurized circulation transportation for hotels and other boilers, as well as heating circulation for urban housing, with a usage temperature below 105 ℃.

Inhalation pressure<1.6mpa Or the working pressure of the pump system is s1.6 MPa,=''> 1.6mpa.>< 1.6mpu, pump static pressure test pressure is 2.5mpa, please specify the system working pressure when ordering. The working pressure of the aggregation system is greater than 1.=''>1.6mpu, and the static pressure test pressure of the pump is 2.5mpa

2. Environmental temperature<>

3. The volume content of Chinese particles in the conveyed medium shall not exceed 0% of the unit volume 1%, granularity<0 2mm.

installation drawing