IPLEX RX/RT Industrial Endoscope
|
☆ Measurement range: 10.0m
|
☆ Operating frequency: φ4.0mm
|
☆ Detection accuracy: 2
|
☆ Indication error: ± 1
|
Product Introduction
----------------------------------------------------------------------
IPLEX RX/ IPLEX RT
IPLEX RX/IPLEX RTIt is a product with unique featuresPulsarPic image processor, a lightweight industrial video endoscope capable of producing excellent high-resolution bright images. It is equipped with a 6.5-inch anti glare monitor.
Excellent image quality can improve detection quality
Best Image Quality
The IPLEX RX and RT have the best image quality for video endoscopes. Unique PulsarPic ™ Image processors can reduce image noise and sharpen image functions, resulting in excellent high-resolution images.
The IPLEX RX and RT faithfully and vividly reproduce small defects, and have high sharpness and clarity images that can help with accurate and reliable inspections.
Clear and sharpened images with low noise
Drilling hole Bearings of wind turbine gearbox
2X Bright Lighting System
The IPLEX RX and RT have a brand new LED lighting system, which is approximately twice as bright as traditional video endoscopes. When detecting metal or reflective surfaces, dynamically optimizing the amount of light can reduce the generation of halos.
PulsarPic ™ Image processors can intelligently optimize lighting systems, providing optimized light intensity and increased gain to provide very clear, sharply defined images.
Accurate images in both bright and dark areas
Turbine blades Combustion chamber
The stored images and videos are as clear as real-time footage on site
Comparison of Image Sizes
The IPLEX RX and RT can record the detected images as JPEG still images and MPEG-4 images to a removable USB flash drive.
Improving the image quality of recorded images and videos not only allows for precise image diagnosis on-site, but also enables the use of our free image management software for image diagnosis in the officeInHelp viewer.
Large monitors facilitate precise detection
The compact IPLEX RX and RT are both equipped with a 6.5-inch monitor. This large monitor can clearly display subtle defects of the detected object, making it very convenient for inspectors to identify and improve work efficiency.
Best Image Color Levels
IPLEX RX has unique image processing technology WiDER ™ This innovative technology can highlight the details of shadows and high brightness areas in the image, allowing for optimal detection in large spaces or highly reflective areas.
In addition,The IPLEX RX is equipped with sharpness and color saturation adjustment functions, which can present the best image for you based on the detected object and application environment.
Sharpness: Level-1/Color: Standard/Normal Gain Settings Sharpness: Level-2/Color: Bright/WiDER ™ Gain setting
Easy to operate all remote visualization applications
Compact and portable design
The IPLEX RX and RT weigh only 2.9 kilograms/6.4 pounds, including a lithium-ion battery with a two-hour battery life. The compact and portable design allows you to not only easily carry the IPLEX RX and RT to the testing site, but also smoothly detect locations that are usually difficult to detect.
The IPLEX RX is suitable for testing personnel to climb ladders using cross shoulder safety belts. Its compact and simple design makes it easy to climb with one hand
Multiple optional comfort checks
The universal design of IPLEX RX and RT makes it easy for almost everyone to use comfortably. The rotating handle of the host can be changed to a stationary state during the detection process. And let you place the video endoscope in the position you want to choose the viewing distance and angle.
The video output function of IPLEX RX and RT can be connected to external monitors for multi person detection or remote detection work. In addition, the IPLEX RX and RT can also be operated using shoulder straps or fixed with a tripod for later operation.
Two operators share the same detected images by connecting to an external display screen for remote observation. The compact and concise design facilitates one handed climbing
By adjusting the rotation handle of the host, the clearest image can be obtained
Multiple insertion tube variations
The IPLEX-RXRT_LONG IPLEX RX and RT offer a range of insertion tubes, allowing users to choose one that is suitable for completing inspection work. Insertion tubes with diameters of 4.0mm and 6.0mm can be selected, with lengths ranging from 2m to 7.5m.
Smoothly and accurately approach the detection target
TrueFeel can quickly and accurately control bending at the end of the insertion tube. The innovative bending technology of IPLEX RX and RT can smoothly and accurately approach the highest required detection channels.
ImprovedTrueFeel ™ The control handle is equipped with a touch sensitive operation that can accurately and quickly navigate through intricate detection channels, achieving precise detection.
Insertion tubes have unique characteristicsTapered Flex ™ The gradient flexible tube technology optimizes the hardness and flexibility of the insertion tube, resulting in outstanding operability.
Quick and easy operation
Handheld controllers have overThe most common operations of the 14 single touch quick access buttons, such as inserting tube bending, image adjustment, and recording, can be easily activated by pressing the dedicated quick access button on the lightweight handheld device. Simplify the menu settings for IPLEX RX and RT for quick and easy operation.
User friendly menu icons
More intuitive image icons have been added to the menu of IPLEX RX, and all menus of IPLEX RX and RT are displayed with easy to understand icons. Inspectors can intuitively identify the functions or settings required for menus and effective operations.
Sturdy design, reliable and durable, capable of withstanding various harsh environments
Durable body
The IPLEX RX and RT have passed vibration and 1.2-meter/3.9-foot drop impact tests.
The wear-resistant system complies with internationally recognized US defense standards, is sturdy and durable, and ensures stable operation in harsh environments.
Can be operated under various weather conditions
The IPLEX RX and RT comply with internationally recognized US defense standards (MILSTD-810G and MIL-STD-461F) * and IP55, passing a series of rigorous environmental tests such as rain or sand, high humidity, and icy rain. In addition, low reflection monitors can accurately reproduce images even under sunlight.
*For MIL-STD compliance information, please refer to the technical specifications.
High durability insertion tube
Specially treated tungsten wire braided layerOperators often need to cross narrow passages with easily worn and rough surfaces to reach the detection area during inspection work. In addition, the IPLEX RX and RT insertion tubes are designed to withstand pressure and wear. A specially treated tungsten wire braided layer covering the surface.
Additionally,The IPLEX RX insertion tube can withstand high temperatures of 100 ℃/212 ° F. If the temperature exceeds the acceptable range, the high-temperature sensor will prevent overheating by displaying a clear warning sound and warning signs on the monitor.
Advanced features provide excellent detection accuracy and work efficiency
Stereoscopic measurement for reliable detection*
Our stereo measurement technology provides simple operations for defect measurement from different angles. The newly adopted screen switching function can easily and quickly switch between individual defect detection screens and measurement screens.
*Optional features of IPLEX RX
Stereoscopic measurement mode in measurement mode (measuring the distance of defects)
InHelp ™ Check auxiliary software
inhelp InHelp, As a software for data management and report production, the use of IPLEX RX and RT for endoscopic testing has been optimized in all aspects. This software greatly improves work efficiency and simplifies the detection process by managing images saved on IPLEX RX and RT and generating detailed detection reports using simple one click operations on PC.
Wireless LAN function*
*Confirm the use of Toshiba FlashAir WIFI SD card
The instruction manual shows
The comparison between the detection image and PDF file shows that the IPLEX RX has the function of displaying PDF documents. It can alternately view the inspection manual and inspection images, and you can immediately see them displayed simultaneously on the IPLEX RX. This unique feature improves your detection speed and efficiency.
technical specifications
Insert pipe variable | |||||||
IPLEX RX model | IV9420RX | IV9435RX | IV9620RX | IV9635RX | IV9650RX | IV9675RX | 7549061 IV96100RX *1 |
IPIPLEX RT model | IV9420RT | IV9435RT | IV9620RT | IV9635RT | IV9650RT | IV9675RT | 7549062 IV96100RT *1 |
Insert tube diameter | φ4.0mm (0.157in.) | φ6.0mm (0.236in) | |||||
Insert tube length | 2.0m (6.6ft) | 3.5m (11.5ft) | 2.0m (6.6ft) | 3.5m (11.5ft) | 5.0 m (16.4ft) | 7.5m (24.6ft) | 10.0m (32.8ft) |
Insert the outer surface of the tube | High wear-resistant tungsten steel wire braided layer | ||||||
Insert tube hardness adjustment | Single hardness | Tapered Flex ™ The hardness of the gradient flexible pipe gradually increases towards the front end | |||||
Bending angle (up/down/left/right) | 130° | 130° | 150° | 130° | 120° | 100° | *2 |
System weight (including battery) (approximately) | 2.9kg (6.4lb) | 3.0kg (6.6lb) | 3.1kg (6.8lb) | 3.2kg (7.1lb) | 3.3kg (7.3lb) | 3.5kg (7.7lb) | 3.7kg (8.1lb) |
|
IPLEX RX | IPLEX RT |
Insert tube | ||
Bending function | Improved TureFeel ™ The insertion tube has an electric assist function, which enables real-time angle control without any delay. | |
Temperature sensor | 2nd level high temperature warning display | Not applicable |
lighting | Ultra high brightness LED lighting | |
Optical adapter locking device | Double threaded link with O-ring seal | |
Handheld control unit | ||
Size (Width X Height X Length) | 365mm x 93mm x 192mm(14.4in. x 3.7in. x 7.6in.) | |
weight | About 1.0kg (2.2lb) | |
Quick Access Button | The dedicated buttons, levers, or joysticks on the handheld control unit have the following features: bending angle control, image control, recording static images/videos, and menu access. | |
Host unit | ||
Size (Width X Height X Length) | 227mm x 64mm x 189mm(8.9in. x 2.5in. x 7.4in.) Maximum size: 239mm x 99mm x 215mm (9.4in. x 3.9in.) x 8.5in.) |
|
lcd monitor | 6.5in. LCD daylight display screen, anti reflective type | |
Power Supply | Battery: 10.8V (rated), approximately 120 minutes of usage time AC power supply: 100V~240V, 50/60 Hz (with AC adapter included) |
|
Image output standard | VGA | |
USB interface | Type A interface, standard 2.0 version | |
software control | ||
Image control | 5x digital zoom, 10 level digital brightness control | |
gain control | 3-level adjustable gain control, exclusive WiDERTM brightness level balancing technology | Not applicable |
Sharpness Control | 4-level adjustable sharpness control | Not applicable |
Saturation control | 3-level adjustable color saturation control | Not applicable |
Display Text Options | Title text display within 30 characters | |
Record management function | ||
Recording media | USB flash memory (1GB standard, compatible with recommended USB flash devices) | |
title | Choose a 30 character title (date, time, and system settings) | |
Thumbnail image display | The recorded images are displayed in thumbnail format | |
Static image recording | Resolution - H769 x V576 (pixels) | |
Record format - Compressed JPEG format | ||
Single image size - approximately 300KB/s (1GB can store 3400 images) | ||
video recording | Resolution - H640 x V480 pixels | |
Record format - AVI MPEG-4 format. This format can be played directly in a media player | ||
Single image size - approximately 500KB/s (1GB can store approximately 30 minutes of images) | ||
Stereoscopic measurement function - IPLEX RX * optional feature | ||
distance | The distance between two points | |
Point to Line | Point to the vertical distance of a user-defined line | |
depth | Point to the orthogonal depth/height of a user-defined plane | |
Area/Line | Perimeter and area between multiple points |
*Stereoscopic measurement function can be achieved by upgrading IPLEX RX
Operating environment | ||
Homework temperature | Insert tube | In the air: - 25ºC~100ºC (–13ºF~212ºF) IPLEX RX –25ºC~80ºC (–13 ºF~176 ºF) IPLEX RT |
Underwater: 10ºC~30 ºC (50ºF~86ºF) | ||
Other components | In the air: - 10 º C~40 º C (14 º F~104 º F) with battery 0 º C~40 º C (32 º F~104 º F) with AC power adapter |
|
Relative temperature | All components | 15%~90% |
Liquid resistance | All components | Splashing oil, light oil or 5% salt solution can also be operated normally. |
waterproof | Insert tube | Can withstand water pressure: IV94 series - maximum water pressure equivalent to pressure at a depth of 3.5m (11.5ft) IV96 series - maximum water pressure equivalent to pressure at a depth of 7.5m (24.6ft) |
Other components | Can be operated in the rain (battery compartment must be closed) Cannot operate underwater |
MIL-STD compatibility | |
Confirm operating environment performance (excluding IV96100RX, IV96100RT) through the following MIL-STD-810G and MIL-STD-461F standards. Under any conditions, there is no warranty or damage. Please contact the Olympus sales representative for more details. |
|
type | mode |
Vibration | MIL-STD-810G, Method 514.6 Program 1 (General Vibration Test) |
shock | MIL-STD-810G, Method 516.6, Procedure Four (Transport Drop Test) |
waterproof | MIL-STD-810G, Method 506.5 Program 1 (Rain and Blow Rain Test) |
humidity | MIL-STD-810G, Method 507.5 |
Salt spray | MIL-STD-810G, Method 509.5 |
sand dust | MIL-STD-810G, Method 510.5, Program 1 (Dust Blowing Test) |
Ice rain/freezing rain | MIL-STD-810G, Method 521.3 |
Electromagnetic interference (EMI)*3 | MIL-STD-461F,RS103, (Non metallic radiation sensitivity in the environment on the ship deck) |
Explosive environment | MIL-STD-810G, Method 511.5 Program 1 (Testing (Operation) in Explosive Environments) |
*1 Order Production Product
*The reference value is 60 degrees
*3 does not include IV9650RX, IV9650RT, IV9675RX, and IV9675RT
Optical adapter specifications | ||||||||||||
Optical connector adapter variable | ||||||||||||
|
6.0mm optical observation adapter | |||||||||||
AT40D- IV96 |
AT80D/ NF-IV96 |
AT80D/ FF-IV96 |
AT120D/ NF-IV96 |
AT120D/ FF-IV96 |
AT220D- IV76 *4*5*6 |
AT80S- IV96 |
AT120S/ NF-IV96 |
AT120S/ FF-IV96 |
AT100D/ 100S-IV76*5 |
|||
optical system | field | 40º | 80º | 120º | 220° | 80º | 120º | 100º | ||||
Observation direction | front | side | Front/Side | |||||||||
Depth of Field*1 |
200 ~ ∞ mm |
9 ~ ∞mm | 35 ~ ∞mm | 2 ~ 200mm | 19 ~ ∞mm | 3 ~ 100mm *7 | 15 ~ ∞mm | 1 ~ 25mm | 3 ~ ∞mm |
15 ~ ∞mm |
||
Hard end | external diameter*2 | ø6.0mm | ø8.4mm | ø6.0mm | ||||||||
Hard end*3 | 18.4mm | 18.9mm | 18.8mm | 18.9mm | 18.8mm | 21.1mm | 24.2mm | |||||
4.0mm optical observation adapter | Oil proof optical adapter | Stereoscopic measurement adapter (4.0mm and 6.0mm) | ||||||||||
AT80D/FF-IV94 |
AT120D/ NF-IV94 |
AT120D/ FF-IV94 |
AT100S/ NF-IV94 |
AT100S/ FF-IV94 |
AT120D/ NF-IV94R-W |
AT50D/ 50D-IV94 |
AT50S/ 50S-IV94 |
AT60D/ 60D-IV96 |
AT60S/ 60S-IV96 |
|||
optical system | field | 80º | 120º | 100º |
120º |
50º/50º | 60º/60º | |||||
Observation direction | front | side | front | Before/Before | Side/Side | Before/Before | Side/Side | |||||
Depth of Field*1 | 35 ~ ∞ mm |
2 ~ 200 mm |
17 ~ ∞ mm |
2 ~ 15 mm |
8 ~ ∞ mm |
2 ~ 200mm | 5 ~ ∞mm | 4 ~ ∞mm | 5 ~ ∞mm | 4 ~ ∞mm | ||
Hard end | external diameter*2 | ø4.0mm | ø4.0mm | ø6.0mm | ||||||||
Hard end*3 | 19.0mm | 21.7mm | 19.0mm | 24.3mm | 28.4mm | 24.9mm | 31.3mm |
*1. Indicate the observation distance and optimal focus.
*When the adapter is installed on the insertion tube, it can be inserted into small holes with diameters of 4.0mm and 6.0mm.
*3. Indicates the length of the rigid portion inserted into the end of the tube during installation.
*The optical lens of this optical adapter is protruding. Please use with caution during the inspection process and do not scratch the optical lens.
*5. These optical adapters do not support scale measurement.
*The protruding device on this optical adapter is designed to protect the optical lens. Therefore, protrusions may appear on the screen, but this is not a problem with the product itself.
*7. This optical adapter is suitable for inspection work in pipelines with a diameter of less than 50 millimeters.