SHA-2A full temperature water bath oscillator detailed introduction:

1： Introduction to SHA-2A Full Temperature Water Bath Oscillator:

The SHA-2A full temperature water bath oscillator is a biochemical instrument that combines a temperature controlled constant temperature box and a speed regulating multi-purpose oscillator. It is mainly suitable for oscillation cultivation of various liquid and solid compounds such as biology, biochemistry, cells, and bacterial strains in various universities, medical, petrochemical, health and epidemic prevention, environmental monitoring and other scientific research departments. During the experimental process, it is often necessary to constantly shake the test solution to prevent precipitation or to compare two or more test solutions at a certain shaking speed and temperature. Using this instrument can achieve ideal results.

2： Characteristics of SHA-2A full temperature water bath oscillator:

1. Temperature control range: -5-100 degrees.

2. Temperature control method: Adopting microcomputer temperature control, precise temperature control, no overheating or overshoot phenomenon.

3. There are three oscillation modes: rotary, reciprocating, and dual function.

4. Inner liner material: high-quality stainless steel, universal spring clamp, and different clamps can also be designed according to requirements.

5. Shell material: High quality cold plate surface with electrostatic spraying, rust prevention, and extended service life.

6. Motor type: Permanent magnet DC motor, small size, high power, long service life, and also has the characteristics of low noise.

7. Speed regulation mode: stepless speed regulation, or microcomputer closed-loop control speed regulation mode (speed display, speed deviation of 0) can be selected.

8. Safety category: equipped with leakage protection, automatic power-off function, over temperature protection, and sound and light alarm.

9. Timing range: 0-120 minutes or microcomputer 0-9999 minutes with timing and normally open function.

3： SHA-2A full temperature water bath oscillator detailed parameters:

4： Instructions for using SHA-2A full temperature water bath oscillator

(1) Firstly, check if the water valve of the instrument is closed, add water to the appropriate height, and then plug the power plug of the instrument into a power supply with a capacity of not less than 2 kilowatts and a "grounded" connection. Select the timer to the desired working time or to the normally open position. Press the power switch, and the power indicator light will turn on to indicate that the internal power supply has been connected. Rotate the speed control knob to select the desired oscillation frequency.

(2) Temperature selection: Press the 'set' (function key) to select the desired temperature when the temperature controller displays' sp '. Adjust the up or down key to select the desired temperature. Once selected, press the' set 'key to exit. At this point, the upper digital display shows the actual temperature inside the slot, and the lower display shows the set temperature. Due to the advanced temperature controller used in the instrument, it has an automatic switching function for heating and cooling, eliminating the hassle of previous operations.

(3) If the set temperature is higher than the indoor temperature, the cooling switch needs to be turned off and the working temperature can be set according to the above method.

(4) Turn on the oscillation switch to select the oscillation mode as needed, click △ or ▽ to select the oscillation speed, and then click the run button.

(5) The temperature control system is equipped with an over temperature alarm function and also has a constant temperature time alarm function, which is convenient for reminding operators.

(6) After use, turn off the power. If not in use for a long time, please unplug the power. If there are water droplets inside the box, please clean and wipe them clean in a timely manner to extend the service life.

SHA-2A full temperature water bath oscillator can be customized according to customer requirements

SHA-2A full temperature water bath oscillator after-sales service: three guarantees for one year, lifetime maintenance!