Picture of horizontal corner cleaner

Horizontal corner cleanerImage caption: The left image shows a new type of horizontal corner cleaner from the past 5 years, which supports online sewage discharge and is cost-effective; The image on the right shows the old and old horizontal corner cleaner that requires backwashing for sewage discharge and does not support online sewage discharge.

Main parameters of horizontal corner cleaner

Nominal pressure: 1.0MPa-1.6MPa-2.5MPa;

Medium temperature: 0-150 degrees;

Applicable media: water, oil, steam, seawater, sewage.

Specification caliber: 50 to 1200mm.

Flange standard: GB9112-9131

Test standard: GB/T13927 AP1598。

Characteristics of Puhui brand horizontal corner cleaner

The characteristics of the horizontal corner cleaner and corner cleaner are that they can discharge pollutants without shutting down the pipeline, and manual operation can be performed at regular or irregular intervals. By changing the direction of the handle, the flow of the majority of the medium inside the straight through cleaner is altered, causing an instantaneous increase in pressure and the discharge of debris; The horizontal corner cleaner equipment has no vulnerable parts and only needs to be regularly discharged according to water quality; Large amount of filtered water; The pressure loss of the decontamination device is small, and the amount of treated water is large; Low overall cost: Carbon steel shell, 304 stainless steel filter screen does not require disassembly and replacement, with a long service life;

Horizontal corner cleaner and corner cleaner are directly installed on the product pipeline without any support structure, usually close to the protected equipment; The flow direction of the medium in the horizontal corner cleaner and corner cleaner should be consistent with the direction of the arrow marked on the product label The sewage outlet should face downwards, and the sewage pipeline should be equipped with a sewage valve. The functional characteristics and technical performance of the horizontal corner cleaner include: sealing without leakage; The system does not shut down and automatically discharges pollutants; The filtering accuracy depends on the mesh size of the filter.

Main components of the horizontal corner cleaner:

1. The flange reducer head of the cleaner shell,
2. The cylinder flange cover is connected to the valve plate shaft sleeve, the upper shaft sleeve, the lower shaft sleeve, the hand plate seal, the oil seal gasket, and the pressure cover,
3. Filter mesh holder,
4. Drainage flange drainage pipe.

Working principle and structural dimensions of horizontal corner cleaner

Working principle of horizontal corner cleaner

The following is a picture of the working principle of the horizontal corner cleaner. From the picture, it can be clearly seen that the working process of the horizontal corner cleaner is that the water flows from the inlet to the cleaning filter cylinder, passes by the turning valve, and the filtered water flows into the outlet and pipeline; In daily work, the steering valve is in the same direction as the dirt removal filter cylinder and is in an open state, just like the common handle butterfly valve is in an open state, which does not affect the passage of water flow; Only when it is necessary to discharge sewage, the turning valve, valve plate or butterfly plate is horizontally placed in the middle of the decontamination filter (the turning valve is in the closed state of the butterfly valve), and a decontamination filter cartridge is divided into two parts.

Discharge: At this time, the water flow can only be filtered and purified through the first half of the filter cartridge. The purified and filtered water flow is divided into two parts, one flows out from the outlet and the other flows back into the filter cartridge. Because during sewage discharge, water can flow in two parts, it is a pollutant remover that can discharge water online. During sewage discharge, it does not affect normal water supply; Because water can flow back into the filter cartridge, it has a backwashing function. When the water flows back to the filter cartridge, the filter cartridge itself is also washed clean, and the accumulated and stored impurities are also washed out at the moment of opening the sewage outlet. After the discharge process is completed, close the discharge outlet. Just like a brand new horizontal corner cleaner added to the pipeline.

Dimensions of horizontal corner cleaner

The following chart provides you with the structural dimensions of commonly used horizontal corner cleaner, expressed in millimeters. The horizontal corner cleaner can also be customized and produced in various sizes.

Puhui Valve, provided for free! Puhui's similar decontamination products also include:Vertical straight through cleaner，YType pollutant remover，Horizontal straight through cleaner，KCType pollutant removerThe functions are similar, but each product has its own characteristics! Welcome to compare and choose!