ST-301D High and Low Speed Pulling Machine
Product Usage:
ST-301D High and Low Speed Pulling MachineSuitable for tensile strength, peel strength, deformation rate, tensile strength, peel strength, opening force, etc. of plastic film, composite film, adhesive tape, medical patch, protective film, release paper, rubber, artificial leather, paper fiber and other productsthrustWaiting for performance testingEspecially with the adjustable angle test piece fixing plate on the machine, the height and angle of the sensor can be adjusted according to the user's needs. Can perform peeling tests from various anglesApplicable to specifications such as PSTC, ASTM, TLMI, FINAT, and AFERA, and can be used at 90 ° and 180 °.
Application areas:
Adhesive tape, automobiles, ceramics, composite materials, construction, food and medical equipment, metals, paper, packaging, rubber, textiles, wood, communication, and various shaped materials
Standards:
PSTC: 101 (A, B, C, D, E, F), 4, 15, 55,ASTM D 3330,GB/2792
TLMI: L-IA1, L-IA2, L-IA3 、AFERA: 4001 P11
FINAT: FTM 1-6, 10, 11
Product features:
1,angle90°,180 ° adjustable;
2,speed100Adjustable from mm to 30000mm/min;
3,High frequency acquisition rate software makes testing more efficientaccurate;
Safety device:
1.Travel protection:Set as upper and lower limitsprotectstart,Prevent exceeding the preset travel distance;
2.Power protection: The system can be setForce value, to prevent exceeding the sensor calibration value.
Test software description:
The testing machine measurement and control system is designed specifically for microcomputer electronic testing machines, microcomputer hydraulic testing machines, and microcomputer press machines. Can conduct tensile, compressive, bending, shear, tear, and peel tests. useCollect, store, process, and print test results using a PC and interface board. Parameters such as computable force, yield force, average peel force, deformation, yield point, elastic modulus, etc; Capable of curve processing, multi-sensor support, graphical interface, flexible data processing, and MS-ACCESS 2003 database support, making the system more powerful.
measurement and control softwareuseVisual Studio. Net development, supporting Windows XP/Win7 operating systems;
supportMultiple languagesSwitching freely, the database field display names of the experimental data are automatically translated following the selected text, making it easy to browse the data in local text and basically meeting the needs of the testing machine for use worldwide;
support3 types: SI international standard units, kg cm units, Lb Inch imperial units, 6 commonly used unit systems: N-mm MPa, kN mm MPa, gf cm kgf/cm2、kgf-cm-kgf/cm2、Lb-Inch-kpsi、kP-Inch-kpsi, Easy switching of units. Meet the usage standards of different regions.
Using photoelectric isolationThe USB 2.0 communication interface completely solves the problem of computer serial port or circuit board serial port damage caused by different ground, and realizes hot plugging of computer and testing machine circuits.
The software adopts permission hierarchical management: tester level permission, test management permission, and testing machine manufacturer permission, which balances the convenience and security of use.
technologyparameter:
Machine model |
ST-301D |
capacity selection |
10N, 20N, 50N, 100N, 200N, 500N (choose one group) |
control mode |
The full computer control adopts the Windowa mode working platform, USB2.0 serial port connection, with language switching such as Simplified Chinese, Traditional Chinese, English, etc. It can realize curve analysis, raw database export, test report output, arbitrary speed switching, and can perform stretching, peeling and other tests. |
Angle adjustment |
Measurement from multiple angles such as 45 degrees, 90 degrees, 135 degrees, 180 degrees, etc |
Unit of Strength |
N、kN、gf、kgf、lbf、kP) |
Length unit |
mm、cm、Inch |
stress unit |
Pa、Kpa、Mpa、 |
Power resolution |
1/500,000 |
measurement accuracy |
± 0.5% |
measurespeed |
100-30000mm/minadjustable |
Effective stroke |
500 mm |
Test piece width |
50mm |
Shutdown mode |
Upper and lower limit safety settings, specimen breakpoint sensing |
Result output |
Computer Output |
Motor driven |
Delta servo motor+Delta servo driver |
Machine transmission |
Ball screw+linear guide rail |
Machine power |
400W |
Machine size |
1363mm(W)×420mm(D)×850mm(H) |
Use power supply |
220V 50Hz |
Standard configuration |
One set of fixtures, one power cord, and one manual |