Our company produces electric heat tracing magnetic flap level gauges, anti frost type magnetic flap gauges, and jacket type level gauges, which are suitable for various environments such as low temperature to high temperature, vacuum to high pressure, etc. They are ideal level measurement products for industrial sectors such as petroleum and chemical industry. According to the different installation positions in the container, two forms are provided: side mounted and top mounted. According to different working media, three materials are provided: stainless steel, ABS, and PP-R engineering plastics. Among them, ABS and PP-R materials are suitable for corrosive media such as acid and alkali. Features: Float as measuring element, magnetic steel driven flip column display, no energy required. Equipped with upper and lower limit switch outputs, it can achieve remote alarm and limit control. Equipped with a transmitter, remote liquid level indication, detection, and control can be achieved. Main technical indicators: Installation form, content, side mounted, top mounted, installation spacing (measurement range), stainless steel 500~5000 (mm), 500~2500 (mm), ABS, PP-R 500~4000 (mm), working pressure 0.6, 1.6, 2.5, 4.0 MPa 0.6, 1.6, 2.5 MPa, medium density>0.6 g/cm3>0.76 g/cm3, main material 1Cr18Ni9Ti, ABS, PP-R (working pressure 0.6 MPa), medium temperature -40~100 ℃ (ABS, PP-R: -40~80 ℃), ambient temperature -40~+70 ℃, indication error ± 10mm, medium adhesive side mounted jacket type magnetic flap level gauge is a heat tracing system, suitable for measuring liquid level in antifreeze, insulation and heating occasions, jacket type with steam clamp. Sleeve, water circulation jacket, vacuum jacket, electric tracing, etc. Explosion proof electric heat tracing system can be implemented according to on-site requirements.

Type selection:

Steam jacket and water circulation jacket: It is to add a layer of cylinder outside the main tube of the liquid level gauge for the circulation of steam, circulating water or thermal oil;

Vacuum jacket: It is a layer of vacuum cylinder added outside the main tube of the liquid level gauge to insulate the measured medium from the outside;

Electric tracing: It is to wrap an electric tracing coil around the main tube of the liquid level gauge and apply electricity to heat the medium;

Users can use remote transmitters according to engineering needs, which can achieve local digital display and output standard remote transmission electrical signals of 4-20mA to meet the needs of recording instruments or industrial process control. It can also be used in conjunction with magnetic control switches or proximity switches to monitor liquid level alarms or control inlet and outlet equipment.

Suitable for measuring and controlling the liquid level and boundary position of various liquid containers. Clear indication of the liquid level height, intuitive and eye-catching display, complete isolation between the indicator and the storage tank, safe use, reasonable design, simple structure, convenient and reliable installation, stable performance, long service life, low maintenance costs, and easy installation and maintenance.

Technical parameters:

Measurement range: 150-8000mm. For liquid level gauges with a center distance exceeding 8000mm or with a length that cannot be exceeded under remote transmission conditions, segmented manufacturing can be used.

Work pressure: 2.5MPa

Working temperature: UHZ-517C15: -20~100 ℃

UHZ-517C15A:-30～100℃

Accuracy: ± 10mm

Medium density: 0.5-2.0g/cm3

Environmental vibration: frequency ≤ 25Hz, amplitude ≤ 0.5mm

Follow speed: ≤ 0.08m/s

Medium viscosity: ≤ 0.4 Pa · s. For high viscosity media or media that are prone to crystallization at low measurement temperatures, a heating jacket type liquid level gauge can be used

Process connection: Side installation flange for bypass: DN25, PN1.0 or PN1.6, PN2.5 convex surface

Flange standard: HG20592-20635-97 Other flange standards should be specified by the user.