Handheld video fiber optic magnifying glass

In today's rapidly changing communication technology, the bandwidth of fiber optic communication is rapidly increasing, and more and more DWDM systems are being put into operation. To ensure high-quality transmission performance, in addition to using high-quality fiber optic connectors, it is more urgent to maintain the cleanliness of fiber optic connectors. In today's fiber optic transmission systems, especially DWDM systems, even tiny chips or damage (near the fiber core) of 1 micron can cause severe insertion loss. Therefore, it is very important to strictly inspect all fiber optic end faces, including those on distribution frames or hardware equipment. The video fiber optic inspection probe is an ideal device for specifically inspecting the end faces of these optical fibers.
This system saves you time and increases convenience, allowing you to quickly and conveniently inspect the fiber end face from the front of the patch panel or hardware equipment - without having to go to the back of the patch panel or disassemble the relevant hardware equipment before inspection. Instead of removing each connector, you only need to move the front connector to inspect without removing the back connector. Moreover, in many hardware devices, such as fiber optic transceiver modules, this probing type video fiber optic inspection magnifying glass is the only feasible instrument, as it is often impractical to disassemble the system for inspection in practice.

The video fiber optic inspection probe is compact and lightweight, containing a coaxial LED light source, a set of optical lens systems, and a 1/3-inch CCD video camera. The focus knob is used for fine adjustment of focal length.

In conjunction with video fiber optic inspection probes, various types of adapters are provided, which can be used to directly inspect various types of fiber optic connectors (FC, SC, ST, LC, etc.) through optical interfaces (or flanges).

The video signal of the video fiber optic inspection probe can be transmitted to portable display devices for display, or output to desktop monitors for indoor applications.

• Performance characteristics:
• Provide two types of adapters that can be used to inspect various types of fiber optic connectors (FC, SC, ST, LC, etc.) through flanges or directly
• Clear and vivid images are displayed on the video monitor, with a small and lightweight probe
• Equipment video terminal can be optionally selected. Equipment video terminal can be optionally selected. Equipment video terminal can be optionally selected. 9.7-inch LCD monitor or 3.5-inch LCD monitor can be optionally selected
• Technical parameters:
• Magnification factor: 200x magnification
• CCD area: 1/3 inch
• Focusing method: manual focusing
• Power consumption: 2W
• Working temperature:- 10℃-40℃
• Display screen: 9.7-inch HD high-definition LCD
• resolving power: