HY-8 (A) Large Capacity Oscillator Description
Variable speed multipurpose oscillator is a biochemical instrument that mixes multiple samples uniformly under the same environmental conditions, oscillating up and down, left and right, and swirling. This series of products runs smoothly, has low noise, and the oscillation speed is infinitely adjustable. It uses stainless steel spring universal fixtures (or customized special fixtures) and can be matched with various test bottles to meet the needs of different customers. It is the preferred equipment for research and production in industries such as biochemistry, bioengineering, teaching, microbiology, and medicine.
HY-8 (A) high-capacity oscillator Detailed information:
Model
TypeNo.
|
way of working
Working Style
|
Oscillation amplitude (mm)
Vibration Range (mm)
|
Oscillation frequency (rpm)
Vibration Frequence (rpm)
|
time range
Time Fixed Range
|
Whole machine power (W)
The Whole Machine Power (W)
|
Working size (cm)
Working Size (cm)
|
Dimensions (cm)
Outside Size (cm)
|
HY-8(A)
|
Convolute
|
20
|
260
|
0~120
|
120
|
70×62
|
70×62×28
|
IICyclotron oscillatorusage method:
1:Firstly, place the container (bottle) that needs to be oscillated into the oscillation plate spring. The solution in the container cannot exceed one-third of the container, otherwise it must be plugged.
2:Check the timer knob and turn it to the ON position or the time position you need to specify.
3:Turn the speed control knob counterclockwise to the lowest speed position, turn on the power switch, the power indicator light will turn on, and then turn the speed control knob clockwise to the desired position
Speed.
IIICyclotron oscillator Attention: (with A indicating digital speed measurement)
1This rotary oscillator uses a three eye safety socket, and must be properly grounded when in use.
2When working, the machine should be placed on a flat and sturdy tabletop to prevent vibration.
3The clamp spring is only used for fixing small and medium-sized bottles, and for extra large containers, several springs should be removed or reinforced in other ways.
4After use, the power of this machine should be turned off, placed in a dry and ventilated place, and kept clean.
|