HS616e ultrasonic flaw detector

☆ Measurement range: 0-12000mm

☆ Operating frequency: 1000-15000m/s

☆ Detection accuracy: 0.2-20MHz

☆ Indication error: 0.01

Product Introduction

----------------------------------------------------------------------

HS616e ultrasonic flaw detectorIt is the latest model of the HS61X family series, featuring a fully digital, true color display screen and a range of innovative features. It is the flagship product of our company's conventional flaw detector.

A special advantage

All digital, true color display, freely adjustable background color and brightness value according to the environment, leading domestic application technology

Digital shuttle knob, one click operation

Adopting the EU certification standard EN12668-1:2000; Provide one European standard appraisal report in both Chinese and English

Spectrum analysis, high-speed FFT operation, measured probe frequency

High performance security lithium battery, module plug-in, one machine with two batteries and two charges, leading the trend

B emits pulses

Pulse intensity: graded selection, set to 200V, 300V, 400V, suitable for a wide range of probes

Pulse width: 100-300ns continuous adjustment, matching the optimal sensitivity of probes with different frequencies for flaw detection

Impedance matching: 51 Ω, 150 Ω, 200 Ω, 400 Ω, meeting different working requirements for sensitivity and resolution

Working mode: Single crystal flaw detection, twin crystal flaw detection

C-scan range

Zero interface incidence~14000mm (steel longitudinal wave), adjustable proportionally and continuously in two modes.

D amplification receiving

Hardware real-time sampling: 150MHz, waveform high fidelity

Detection methods: full detection, positive and negative detection, RF wave display

Gate signal: single gate, double gate, full screen retrieval, peak reading inside the gate.

Value added/fully automatic gain: set 0.1dB, 1dB, 2dB, 6dB step values, set amplitude height value, fully automatic gain mode

E alarm

Sound and light alarm and closure inside the gate and curve

F Data Storage

50 sets of quick selection of flaw detection parameter channels, pre calibrated combination parameters of various probes and instruments, freely set various industry flaw detection standards, convenient storage, calling, retesting, printing, and communication transmission

Memory 1000 ultrasonic echo signals and data, realizing computer management for storage, reading, browsing, single printing, continuous printing, and communication transmission.

Parameter attachment: Set flaw detection parameters in full Chinese, input real-time data, randomly store, call, print, report communication

G flaw detection function

Peak memory: Real time retrieval of the highest wave of defects, calibration of the maximum value of defects

Practical AVG: Practical AVG curve, automatic conversion of defect diameter (outside 3Nus)

Crack height measurement: Identify the highest wave of defects and measure height using real-time diffraction method

Dynamic recording: Detecting real-time dynamic recording waveforms, storing and replaying them

Defect localization: actual horizontal value L, depth value H, sound path value S

Defect quantification: actual SL quantification value

Defect qualification: judged by envelope waveform and manual experience

Surface correction: Surface workpiece inspection, correction curvature conversion

Distance compensation: Real time compensation for long-distance detection of thick workpieces to avoid missing small defects

B-scan: Real time scanning, describing defect cross-sections

Real time clock recording for H

Real time tracking and recording of inspection dates and times, and storing them

I Control Interface

High speed USB and RS232 interfaces provide transmission and printing

J screen protector

When in standby mode, the screen can be turned off to save energy, reduce the number of power on and off times, and extend the service life of the instrument

Pulse intensity: 200V, 300V, 400V

Three selectable pulse widths: 100-300ns continuously adjustable

Impedance matching: 51 Ω, 150 Ω, 200 Ω, 400 Ω

Four optional working modes: single crystal flaw detection, twin crystal flaw detection

Scanning range: Zero interface incidence~14000mm steel longitudinal wave sampling frequency/bit: 150MHz/8bits

Detection methods: full detection, positive and negative detection, RF wave display. Operating frequencies: 0.4-4MHz, 2-8MHz, 10MHz, 2MHz-20MHz

Noise level of each frequency band:

Attenuator accuracy: ＜ ±1dB/12dB

Gain adjustment: 110dB (0.1dB, 1dB, 2dB, 6dB step, fully automatic adjustment)

Speed range: (100-20000) m/s Dynamic range: ≥ 30dB

Vertical linear error: ≤ 3% Horizontal linear error: ≤ 0.1% Resolution:> 40dB（5N14）

Sensitivity margin:> 62dB (200mm deep, Φ 2 flat bottomed hole)

Digital suppression: (0-80)%, does not affect linearity and gain

Power supply and voltage: direct current (DC) 7.2V ± 10%; AC 220V ± 10%

Working hours: Continuous work for more than 6 hours (powered by lithium batteries)

Environmental temperature: (-10~40) ℃ (reference value)

Relative humidity: （20～95）% RH

Dimensions: 220 x 175 x 55 (mm)

1. One host (including one lithium battery)

2. Two probe wires (Q9-Q9)

3. One power charger

4. One lithium battery

5. One battery charging cable

6. Carry a set of portable homework with you

7. A set of communication cables and communication driver software

8. One instrument carrying case

9. One copy each of the user manual, certificate of conformity, and warranty card