Guwei GPM-8213 power meter-Fornitore globale

Room 1008, Building C, Xinghe Legend Phase III Commercial Building, Lvjing Road, Minzhi Street, Longhua District, Shenzhen

GPM-8213 功率计
Guwei Electronics GPM-8213 is a digital power meter designed specifically for single-phase (1P/2W) AC power measurement. This product adopts a 4 "TFT LCD display screen, 5-digit measurement display, provides 19 power measurement related parameters, integral measurement function, and has high-precision voltage/current/power measurement capability, front/rear panel input terminals, rich communication interfaces, etc., to assist users in achieving clear, convenient, and accurate power measurement.

GPM-8213 provides up to 19 relevant parameters for power measurement, including voltage (Vrms/V+pk/V-pk), current (Irms/I+pk/I-pk), frequency (VHz/IHz), power (P/P+pk/P-pk), peak factor (CFV/CFI), apparent power (VA), reactive power (VAR), power factor (PF), phase angle (DEG), as well as measuring total harmonic distortion rate (THDV/THDI) and high-precision voltage/current/power measurement capability (± 0.1% read value ± 0.1% gear); And it makes good use of the advantages of TFT LCD display screen. In addition to presenting the same four measurement parameters as traditional power meters in a simple mode, it even has a mode that can display up to 8 measurement parameters (2 main measurements+6 monitoring measurements), which not only meets the needs of precision and clarity in process testing, but also meets the diverse measurement application requirements in research and development design and quality verification.

GPM-8213 also provides excellent measurement support for products under test that meet the equipment requirements for standby power consumption measurement according to IEC 62301/EN 50564. This includes a testing bandwidth of up to DC~6kHz, support for minimum current levels up to 5mA (resolution up to 0.1uA), a power measurement resolution of 1uW, a peak factor of up to 3 (half range up to 6), and the ability to measure total harmonic distortion rate (at least 13th order power harmonics). For high voltage/high current measurement applications in general power measurement, PT/CT rate function is also provided to be paired with external potential transformers or current transformers to meet measurement requirements.

In addition, in terms of data retrieval and storage, in addition to being able to write programs for reading through the standard RS-232C/USB interface (virtual COM)/LAN, an optional GPIB interface (to be installed before leaving the factory) is also provided to meet the habits of most users of automatic measurement systems.

GPM-8213 power meterMain features:
4 "TFT LCD display screen
Two numerical display modes
Standard screen: Display 2 main test items+6 small test items
Simple screen: Display the test values of 4 main test items
• Meet the requirements for power measurement in accordance with IEC 62301
Voltage/current testing bandwidth can reach DC~6kHz
Watt resolution can reach up to 1uW
The minimum current file bit is 5mA, and the resolution can reach 0.1uA
The current/voltage can measure abnormal waves with a CF of 3, and the half range CF can reach 6
W-h power time/A-h current time integration function
Measurement of Total Harmonic Distortion
• Front panel test terminals
• Standard interface: RS-232C, USB device, LAN
• Selection interface: GPIB (must be installed before leaving the factory)
• Choose accessories: GPM-001

GPM-8213 power meter specification parameters

specifications

general

pay attention to	This specification is applicable to GPM-8213 for at least 30 minutes of warm-up The following are the basic operating specifications that GPM-8213 meets: ·1 year calibration period ·All specifications are operated in slow mode ·Accuracy: ± (read value%+gear%) ·The grounding terminal of the power cord must be securely connected to the ground ·The input voltage/current must be a sine wave ·The power factor is 1 ·The waveform factor is 3 ·Common mode voltage is 0
Specification status	Temperature: 23?C±5? C Humidity:< 80% RH (non condensing)<>
Operational state	Temperature range of 0 ° C to 40 ° C, ·30~40 ° C, relative humidity<70% RH (non condensing) ·>40 ° C, relative humidity<50% RH (non condensing)
Save State	Temperature -40 ° C~70 ° C Humidity<90% RH (no condensation)
Use power supply	AC 100-240V, 50–60Hz ; Power consumption 25VA (maximum)
Dimension	270 (width) x 110 (height) x 350 (depth) mm, approximately 2.9 kilograms

input

project			specifications
INPUT VOLTAGE			600 Vrms
Input Current			20 Arms
Input impedance (50/60 Hz)	voltage		2.4MΩ
	electric current	5mA - 200mA	500mΩ
		0.5A - 20A	5mΩ
Maximum display voltage			700 Vrms
Maximum display current			25 Arms
Maximum allowable insulation voltage			300 V
low frequency filter	cut-off frequency		500 Hz

display

synchronization frequency	45Hz ~ 6kHz
Average frequency	1, 2, 4, 8, 16, 32, sixty-four
Display project (standard mode)	8 projects (simultaneously)
Display project (simple mode)	4 projects (simultaneously)
Display digits	5
Voltage converter (PT ratio)	1 ~ 9999.999
Current converter (CT ratio)	1 ~ 9999.999
measuring items	Voltage, current, effective power, apparent power, ineffective power, power factor, phase angle, frequency, integrated current, integrated power, positive integrated power, negative integrated power, integration time, voltage waveform factor, current waveform factor, peak voltage, peak current, total harmonic distortion
Measurement display symbol	Vdc, Vrms, V+pk, V-pk, Idc, Irms, I+pk, I-pk, P, P+pk, P-pk, VA, VAR, PF, CFV, CFI, DEG, VHz, IHz, THDV, THDI

voltage measurement

Measurement gear		CF=3 :	15V, 30V, 60V, 150V, 300V, 600V
		CF=6 :	7.5V, 15V, 30V, 75V, 150V, 300V
Waveform factor		3, six
accuracy	Effective range	1%~105% of the gear range
	DC	± (0.2% reading+0.2% gear)
	45 Hz ≤f ≤ 66 Hz	± (0.1% reading+0.1% gear)
	66 Hz < f ≤ 1kHz	± (0.1% reading+0.2% gear)
	1 kHz < f ≤ 6kHz	± 3% gear
	Filter on	Increase error by 0.3% reading @ 45Hz to 66Hz
Temperature influence	5-18? C / 28-40? C	Increase reading value by ± 0.03%/? C
Residual noise		0.5% gear

Current Measurement

Measurement gear		CF=3 :	5mA, 10mA, 20mA, 50mA, 100mA, 200mA, 500mA, 1A, 2A, 5A, 10A, 20A
		CF=6 :	2.5mA, 5mA, 10mA, 25mA, 50mA, 100mA, 250mA, 0.5A, 1A, 2.5A, 5A, 10A
Waveform factor		3, six
accuracy	Effective range	1%~105% of the gear range
	DC	± (0.2% reading+0.2% gear)
	45 Hz ≤f ≤ 66 Hz	± (0.1% reading+0.1% gear)
	66 Hz < f ≤ 1kHz	± (0.1% reading+0.2% gear)
	1 kHz < f ≤ 6kHz	± 3% gear
	Filter on	Increase error by 0.3% reading @ 45Hz to 66Hz
Temperature influence	5-18? C / 28-40? C	Increase reading value by ± 0.03%/? C
Residual noise		0.5% gear

Power measurement

accuracy	Effective range	1%~110% of the gear range
	DC	± (0.2% reading+0.2% gear)
	45 Hz ≤f ≤ 66 Hz	± (0.1% reading+0.1% gear)
	66 Hz < f ≤ 1kHz	± (0.1% reading+0.3% gear)
	1 kHz < f ≤ 6kHz	± 3% gear
	Filter on	Increase error by 0.3% reading @ 45Hz to 66Hz
Temperature influence	5-18? C / 28-40? C	Increase reading value by ± 0.03%/? C

frequency

measuring range	Filter on	30.000Hz to 499.99Hz
	Filter off	30.000Hz to 9.9999kHz
measuring items		Voltage and current
Effective input range		10%~105% of the input voltage file bit
accuracy		± (0.06% reading)

integral measurement

integrator	accuracy	± (Voltage or current accuracy+0.1% reading)
timer	range	0:00~9999:59
timer	accuracy	± 0.01% ± 1 second

ordering information
GPM-8213 with GPIB digital power meter (including RS-232C/USB device/LAN and optional GPIB interface)
GPM-8213 Digital Power Meter (including RS-232C/USB device/LAN)