GLAND9032/9035Each rotating component of the rake is equipped with6～8A rake. During operation, the tractor pulls the rake forward, while the rake is driven by the power output shaft and controlled by a fixed cam installed in the middle,While rotating around the central axis, it also rotates itself,Thus completing actions such as sweeping and releasing grass. The rotating toothed rake is equipped with several teeth around a rotating component, which are opened by the centrifugal force of rotation to carry out the sweeping operation. If the installation angle of the teeth is changed, the grass spreading operation can be carried out. The grass strips collected by the Ba style rake are loose and ventilated, resulting in minimal loss of grass and light pollution. The operating speed can reach up to12～18kilometer/Hours, easy to match with picking equipment.

Structural features:

1. The clutch transmission adopts double bearing support，Sturdy structure；The gearbox transmission gear inside the disc is separated from the overall transmission part, extending its service life;
2. The transmission gear of the arm is located in the gearbox of the oil bath,Low maintenance frequency and low failure rate;
3. There are no refueling points on the arm,Crops will not be contaminated,High quality forage is guaranteed;
4. The gentle contact between the fork and the grass during homework ensures that no debris is carried into the grass bed and the leaves are not damaged, achieving the best grazing effect;
5. The Gran rake has advanced design and strong ground profiling ability, which can effectively reduce vibration during operation. Even on uneven grasslands, it can collect grass thoroughly and reduce losses, achieving the best grazing effect.

Technical parameters: