Fully enclosed electric sliding table electric cylinder-Fornitore globale

Jinhui Technology Park, No. 10 Longxi Road, Zhouxi, Nancheng District, Dongguan City, Guangdong Province

Note: The above quotation is for reference only. The actual quotation is based on the product selection and length!

24Hourly service hotline: Mr. Xie ！

Product Introduction

Jiongyi DGE-40-ZR type fully enclosed synchronous beltelectric cylinderCylinder profile 64 * 64mm, effective stroke 100mm-3000mm, load capacity 1kg-30kg, positioning accuracy ± 0.1mm (accuracy within 1 meter of stroke), maximum speed 5000mm/s (acceleration and deceleration time 0.2 seconds), synchronous wheel 20 teeth, synchronous belt width 25mm, synchronous belt lead 5M, synchronous wheel rotation one circle 100mm, synchronous wheel output shaft Φ 15mm, total length=effective stroke+469mm, low noise, strong dustproof ability, related accessories: Shangyin linear guide rail, German brand synchronous belt, NSK waterproof and dustproof bearings, can be used on a single axis, can be combined on multiple axes, can be designed and customized according to customer stroke requirements, weight KG=6.98+0.81 × stroke (such as stroke 1000mm=0.69mm) 81 × 10)+1.8+0.82.

DGE-40-ZR fully enclosed synchronous belt		Standard product
Horsepower output (W)		400W 750W 220V
Rated torque N.m		19.4
Transmission mode		belt
Repetitive positioning accuracy (mm)		±0.1
Belt specification (mm)		25
Belt lead pitch (mm)		5M
Maximum speed (mm/sec)		5000
Maximum handling Weight (KG)	Horizontal use	30
	Vertical use	10
Effective travel distance (mm)		1~3000

Mechanical dimension diagram

product accessories

Performance and Precautions

1.Small in size and light in weight, the aluminum base with a small width dimension is used to achieve a lightweight and compact structure. High rigidity, high precision, low price, small size, light weight, aluminum alloy structure, modular design, sliding table and base are anodized, and the base is matched with the sliding table to achieve high rigidity and load capacity. The displacement of the load is small, and it can still maintain high stability for the purpose of carrying weight or external load changes.

2.The stainless steel strip dust prevention device uses a unique sealing gasket to cover the mechanism, and adopts stainless steel strip to prevent foreign objects from entering the interior of the actuator. Note: When using stainless steel strips, due to limitationsStrokeandmaximum speedAttention should be paid.

3.Personalized selection can be based on the customer's usage requirements to choose various brands of motors. Our company comes standard with Delta servo motors, which can be installed with reducers or used directly according to specific usage situations. Adjustable according to different applications:

Two driving modes1. Ball screw drive - Repeatable precise positioning; 2. Synchronous belt drive - suitable for long-distance, high-speed, and high load transportation;
2 types of motors1. Stepper motor - Very suitable for low-speed and high load handling; 2. Servo motor - very suitable for high-speed, stable, and precise handling;

4.Sliding tablePrecautions for use: 1It is strictly prohibited to touch the sliding seat during product operation and maintain a safe working range. 2. When using ball screw products verticallyZ-axisTo prevent items from falling, it is recommended to install a brake device on the motor; Gear belt drive is not recommended for vertical useZ-axisWhen the effective travel is too large, resonance may occur, and the maximum speed should be relatively reduced as the travel increases.

5.Lubrication and maintenance of sliding table: 1. Lubrication is very necessary when using a linear module sliding table. If there is not sufficient lubrication, the frictional resistance during operation will increase, which may become the main reason for shortening the product life. Lubrication methods can be roughly divided into manual lubrication and automatic forced lubrication, and appropriate choices can be made according to the system's operating speed, usage environment and other requirements. 2. The frequency of lubrication and oil supply varies depending on the usage conditions and environment. In general, it is recommended to replenish grease every 100km of operation

Motor installation method

Sliding table application field

1. Coating machine

2. Can making equipment

3. Silk screen printing

4. LED devices

5. Laser industry

6. Stage lighting

7. Injection molding robotic arm

8.PCB electronic equipment

9. Automatic soldering equipment

10. Distance detection equipment

11. Medical industryset uphave

12. Data chip reading and writing devices

13. Aging testing equipment: Guanjia

14. Packaging equipment (grabbing and transplanting)

15. Optoelectronic Industry (Zhuomao Optoelectronics)

16. Dust free cloth equipment: (Master's degree source)

17. Automatic loading and unloading of bottle blowing equipment

18. Knitting industry: Patterns are made by sewing machines

19. Optoelectronic equipment: (with more screws)

20. Transplanting and feeding: loading and unloading, circuit board

21. Glass industry: mobile screen wiping and transplanting machine

22. Photovoltaic solar energy, chip testing, motor chips

23. Winding machine: frequency converter skeleton automatic feeding machine

24. Footwear: Glue coating, leather punching (Wanjiang Technical Explanation)

25. Welding equipment: straight seam welding machine, automatic welding equipment

26. Stamping manipulator: X-axis telescopic, secondary multi station

27. Battery equipment: (Zhengye Battery Online Fully Automatic X-ray Inspection Machine)

28. Food industry equipment: high dust prevention requirements, positive and negative pressure dust removal requirements

29. Automatic lathe feeding: CNC workstation connection (precision requirements for rough material cutting)

30. Die casting industry: automatic picking machine, picking arm, telescopic arm, spray machine

31. Cutting and feeding table: furniture industry, automatic cutting machine, equipment factory (fabric film factory)

32. Spraying equipment: single axis spraying, flat spraying, three-axis integrated machine, water transfer printing, three proof spraying (Ouli, Anda), five axis reciprocating machine (XYZ)

Purchase Notes

·quality assurance：1-year warranty, lifetime maintenance

·Delivery address: Your company's factory (logistics delivery - Tiandi Huayu/Debang Logistics)

·Payment method: 40% deposit,The remaining balance shall be paid in full before shipment or collected by logistics.

·The delivery time is after receiving the deposit5-7Working days

·The invoice will be sent to your company along with the goods.