1、 Application Fields

RJLB-10 Fully Automatic Pulling InstrumentIt is a new type of testing instrument newly developed by Beijing Runjie Tiandi Technology Co., Ltd. Suitable for testing the bonding strength of wall insulation and thermal insulation materials in construction projects, as well as the bonding strength of exterior wall decorative tiles, various boards, paints, and other materials.

The detector adopts a mechatronics integrated design, and the entire set of instruments is integrated as a whole. The mechanical components including motor drive, sensors, screw, reaction support, etc. form a "door" structure. At the same time, embedding the measurement display circuit into the instrument allows for direct observation of data. The detector has the characteristics of light weight, fully automatic operation, and easy use.

2、 Compliant with standards

JGJ144-2019 Technical Specification for External Wall Insulation Engineering

JG/T 158-2013 "Rubber powder polystyrene particle external wall insulation system"

JG149-2003 "Expanded Polystyrene Board Thin Plastered External Wall Insulation System"

JGJ110-2008 "Inspection Standard for Bonding Strength of Decorative Bricks in Building Engineering"

JGJ126-2000 "Code for Construction and Acceptance of Exterior Wall Decorative Brick Engineering"

3、 Product Features

1) Integrated design, embedded measurement display circuit

2) Powered by lithium batteries, convenient for outdoor use

3) Automatic testing and breakage judgment, convenient to use

4) Peak hold function for easy data recording

5) Multi point force correction for more accurate data

6) The instrument adopts a touch screen design, with clear display and touch screen operation, which is simple and easy to use

7) High precision sensor with an accuracy of 0.5% FS

Special customization function:

8) Data query function, convenient for querying historical data (500 sets), customizable for users with special requirements

9) Wireless transmission function, convenient for networking, enables remote data dynamic management, and facilitates users to view data, print, etc. in real time (customized by users)

10) Voice broadcasting function (customized by users), easy for users to operate

4、 Technical parameters

1) Electric loading, no manual testing required; Maximum tensile force value: 5kN-10kN;

2) Simultaneously display the force value (kN) and strength value (MPa);

3) Multi point force correction and peak retention function;

4) Tensile stroke: 60mm;

5) Accuracy level: 0.5% F.S

6) Resolution: 0.0001kN

7) Loading rate: (5 ± 1) mm/min, set arbitrarily;

8) Power supply: 12.8V rechargeable battery

9) Weight: 3.5kG

5、 Interface display

5.1 Display and buttons: The main interface displays the tension value and its peak value.

Figure 1 Main interface

5.2 Experimental setup: Set conditions for fracture and contact judgments

Figure 2 Experimental setup interface

5.3 Speed setting: Set the test speed and the speed at which the test ends and returns.

Figure 3 Speed Setting Interface

5.4 Calibration Settings: The force value, displacement/velocity calibration has been completed before the instrument leaves the factory, and there is no need for the customer to calibrate again. If the instrument has inaccurate force values, speed, or displacement, please contact our after-sales technical personnel for calibration under the guidance of professional technicians. (Note: The password to enter the calibration interface is 123.)

6、 Usage method

1. Device startup: After turning on the device power, preheat for 20 minutes.

2. Experimental parameter settings: Click the settings button, click on experimental settings, and set the parameters for fracture and contact judgment.

3. Test speed setting: Set the test speed and return speed.

4. Load reset: When the sensor is in a free state, click the force reset button to reset the force value.

5. Installation sample: Stand the device on the wall and adjust the joint position by inching up and down to connect it with the pulling block.

6. Displacement reset: Click the displacement reset button to reset the displacement.

7. Start experiment: Click the start button to start the experiment, and the experiment will automatically stop after the sample is damaged.

7、 Product configuration

1. Detector host X1

2. Hook test block 40 * 40 * 3 pieces \ 100 * 100 * 3 pieces

3. Power charger X1

4. Packaging box X1

5. Certificate of Conformity X1

6. Warranty Card X1

7. Instruction manual X1