The Fulaik 2850FLECK single tank 6-8T/H fully automatic boiler water softener is suitable for single valve single tank systems. If used for dual tank systems, an additional valve is required to achieve this. Structural features: The piston is arranged horizontally. The other valve body materials are lead-free brass and can be equipped with a hard water free bypass piston, which has a large backwash flow rate. If paired with a dual tank system, an additional valve is required to achieve this. Suitable for boiler water softeners and other industrial water softeners.
1、 Working principle of Fulaike fully automatic water softener:
The Fulaik fully automatic water softener adopts the fixed bed sodium ion exchange softening method. When the fixed bed is running, the water flows through the sodium ion exchange resin layer from top to bottom, and the calcium and magnesium ions in the water exchange with the sodium ions in the resin, softening the raw water. The resin used is 001 × 7 strong acidic styrene cation exchange resin. After the sodium ion exchange resin fails, in order to restore its softening ability, sodium ion regenerators are used for regeneration, including both co current and counter current regenerators. The regenerator is generally a salt (NaCl) solution.
2、 General requirements for the installation of Fulaik water softeners:
① The inlet pressure should be between 0.2-0.5MPa. When the water source pressure cannot meet the requirements, a booster pump can be installed to increase the inlet pressure. If the pressure is too high, a pressure reducing valve should be installed to control the inlet pressure.
② The inlet water temperature should be between 5-45 ℃, and the power supply should be AC 200V/50Hz.
③ The water softener should be installed on a sturdy platform with unobstructed drainage nearby and sufficient space for operation and maintenance.
④ The working environment temperature should be between 5-50 ℃, and the relative humidity should be ≤ 95% (at 5 ℃).