The folding blade agitator is currently an advanced and ideal model, with advantages such as high automation, good mixing quality, high efficiency, low energy consumption, low noise, easy operation, fast unloading speed, long service life of lining plates and blades, and convenient maintenance. The slurry mixer is suitable for mixing plastic, dry hard, lightweight aggregate concrete and various mortars and mortars. Non standard, various specifications of mechanical mixers can be manufactured according to user conditions such as water quality, water temperature, corrosiveness, viscosity, etc. Among them, there are various options for reducers, including domestic, imported, or cycloidal pin and gear reducers;

Performance characteristics:

1. The whole machine adopts a reducer for direct transmission, with a simple and compact structure, smooth operation, and mixing.

2. The mixer shaft connected through a coupling extends into the pool and is equipped with mixing blades.

3. The drive reducer motor can operate continuously or intermittently. The motor is an outdoor type with a current suitable for 380V, 3-phase, 50Hz, protection level IP65, and insulation level F. Adopting a reducer with power as shown in the technical parameter table and variable frequency speed regulation.

4. The base of the mixer is welded with carbon steel plates of considerable size to form a rigid truss support structure, ensuring that the mixer can operate smoothly for a long time.

5. The design of the agitator blades fully utilizes the power transmitted by the motor, resulting in excellent mixing effect. The structure, design, materials, and manufacturing of the equipment ensure long-term safe operation.

6. There is no obvious leakage at all joint surfaces and input/output shaft seals of the gearbox.

7. The deceleration device can transmit the required power for operation under various design conditions and withstand the load transmitted by the mixing shaft.

8. The support of the mixer shaft can bear the weight of the mixing shaft and impeller, and can withstand all torques, bending moments, and axial loads.

9. The mixer runs stably and has low noise; Each operating part has good lubrication or self-lubricating properties, easy refueling, and good sealing, dustproof, waterproof, and anti-corrosion performance.

10. The mixer shaft and blades have sufficient strength, stiffness, and vibration resistance to ensure smooth operation under various design conditions without abnormal vibration.