Product Introduction

The FLOOLINE float switch SWITCH-TEK series LV20/LH25 offers two configurations for vertical and horizontal installation, using one 15VA or 30VA reed switch output, which can reliably detect the liquid level of clean water and chemical solvents. Applicable media include water and sulfuric acid. The liquid level sensor is made of polypropylene (PP) or polyvinylidene fluoride (PVDF) material, installed vertically in the storage tank or horizontally on the tank wall, for high or low liquid level alarm.

Technical Specifications

Installation position: Horizontal or vertical installation ± 20 °

Accuracy: ± 5mm (in water)

Repeatability: ± 2mm (in water)

Specific gravity: minimum 0.6-0.8

Contact type: (1) SPST spring

Contact output: normally open (NO) or normally closed (NC) optional

Working temperature: -40 ℃ to 105 ℃

Pressure: Maximum 6.9 bar

Protection level: NEMA 6 (IP68)

Sensor material: PP or PVDF

Cable sheath: PVC or TFE

Cable type: # 22 American 2-core

Cable length: 2 "(61cm)

Installation interface: 1/2 "NPT or 1/8" NPT

Grade: Universal Type

Certification: CE