Brief introductionProduct introduction

FY3051TG/TAIntelligent direct connection pressure/Absolute pressure transmitter isAdopting fully intelligent capacitive sensors and special integrated circuits and surface mount technology, high-precision miniaturized sensors are used. In terms of conversion principle, digital technology is utilized to compensate for temperature and static pressure, improving measurement accuracy and reducing temperature drift. It has the characteristics of good long-term stability, high reliability, and strong self diagnostic ability. Widely used for measuring pressure and liquid level of liquids, gases, or vapors.

FY3051TG/TAintelligent direct connection pressure/absolute pressure transmitter adoptsfull intelligent capacitance sensor, special integrated circuit and surfacemounting technology, high precision and miniaturized sensor uses digitaltechnology to compensate the temperature and static pressure in the conversionprinciple, which improves the measurement accuracy and reduces the temperaturedrift. It has the characteristics of good long-term stability, high reliabilityand strong self diagnosis ability. it is widely used to measure the pressureand liquid level of liquid, gas or steam.

FY3051TG/TAseriesIntelligent direct connection pressure/Absolute pressure transmitterCan be withHART375、HART475The handheld device can perform address query, testing, configuration and other operations, and can communicate with the transmitter from any wiring endpoint in the control room, transmitter installation site or circuit, completing remote debugging. Attention should be paid when conducting remote communication: there must be no less than250ΩThe resistance.

FY3051TG/TAseries intelligent direct connection pressure/absolute pressure transmitter cancomplete address inquiry, test, configuration and other operations with HART375and HART475 manual operators, it can communicate with the transmitter from thecontrol room, transmitter installation site or any terminal point in the loop,and complete remote debugging. in remote communication, it should be noted thatthere must be a resistance of not less than 250 Ω between the terminal point ofthe wiring and the power supply.

2、 Working principleOperational principle

3、 Product FeaturesProduct features

4、 Technical parametersTechnical parameter

5、 Product classificationProduct classification

6、 Selection ChartSelection chart

7、 External dimensionsExternal dimensions

8、 Installation instructionsInstallation instructions

9、 Wiring instructionsWiring instructions

The above parameters are for reference only and are subject to change without prior notice!