VIP member
Product details
FX1N series PLC
Brief introduction
The FX1N series is a powerful micro PLC that can be expanded to up to 128 I/O points and can add special functional modules or expansion boards. The communication and data link function options make FX1N perfect for important applications such as volume, communication, and special function modules.
Positioning and pulse output function
A PLC unit can simultaneously output 2-point 100KHz pulses, and the PLC is equipped with 7 special positioning commands, including zero return, absolute position readout, absolute or relative drive, and special pulse output control.
Other functions
| Built in 24V DC power supply | 24V, 400mA DC power supply can be used for peripheral devices such as sensors or other components. |
| Clock function and hour meter function | There is a real-time clock standard in all FX1N PLCs. The time setting and comparison instructions are easy to operate. The hour meter function provides valuable information for process tracking and machine maintenance. |
| Continuous scanning function | Define the operation cycle for the continuous scanning time required by the application. |
| Input filter adjustment function | An input filter can be used to flatten the input signal (x000 to x017 in the basic unit). |
| Component annotation recording function | Component annotations can be recorded in program registers. |
| Online program editing | Changing programs online will not result in loss of working time or halt of production operations. |
| RUN/STOP switch | The run/stop switch on the panel is easy to operate. |
| remote maintenance | Remote programming software can monitor, upload, or uninstall programs and data through modem communication |
| Password protection | Protect your program with an eight digit password. |
AC power supply, 24V DC input type
| model | Total I/O count | input | output | size Mm (inches) (Width) * (Thickness) * (Height) |
|||
|---|---|---|---|---|---|---|---|
| number | type | number | type | ||||
 |
FX1 N-14MR-001 | 14 | 8 | leakage type | 6 | relay | 90*75*90 (3.6*3.0*3.5) |
 |
FX1 N-24MR-001 | 24 | 14 | leakage type | 10 | relay | 90*75*90 (3.6*3.0*3.5) |
| FX1 N-24MT | transistor | ||||||
 |
FX1 N-40MR-001 | 40 | 24 | leakage type | 16 | relay | 130*75*90 (5.2*3.0*3.5) |
| FX1 N-40MT | transistor | ||||||
 |
FX1 N-60MR-001 | 60 | 36 | leakage type | 24 | relay | 175*75*90 (7.0*3.0*3.5) |
| FX1 N-60MT | transistor | ||||||
FX1N Performance Specifications
| project | Specifications | remark | |
|---|---|---|---|
| Operation control mode | Running through stored program cycles | ||
| I/O control method | Batch processing method (when executing END instruction) | I/O instructions can refresh | |
| Operation processing time | Basic instruction: 0.55 to 0.7 µ s Application instructions: 3.7 to several hundred µ s |
||
| programming language | Logic ladder diagram and instruction list | Using a step ladder diagram can generate SFC type programs | |
| Program capacity | Built in 8K step EEPROM | Storage box (FX1n-EEPROM-8L) optional | |
| Number of instructions | Basic sequence instruction: 27 Step ladder instruction: 2 Application instruction: 89 |
Maximum available 177 application instructions, including all changes | |
| I/O configuration | Maximum hardware 1/0 configuration point 128, dependent on user selection (maximum software can set address input 128, output 128) | ||
| Auxiliary relay (M coil) |
average | 384 points | M0 to M383 |
| lock | 1152 points (subsystem) | M384 to M1535 | |
| special | 256 points | M8000 to M8255 | |
| Status relay (S coil) |
average | 1000 points | S0 to S999 |
| initial | 10 o'clock (subsystem) | S0 to S9 | |
| Timer (T) | 100 milliseconds | Range: 0 to 3276.7 seconds 200 points | T0 to T199 |
| 10 milliseconds | Range: 0 to 327.67 seconds 46 points | T200 to T245 | |
| 1 millisecond | Range: 0.001 to 32.767 seconds 4 o'clock | T246 to T249 | |
| 100 millisecond accumulation calculation | Range: 0 to 3276.7 seconds 6 o'clock | T250 to T255 | |
| Counter (C) | average | Range: 0 to 32767 numbers 16 points | C0 to C15 Type: 16 bit up counter |
| lock | 184 points (subsystem) | C16 to C199 Type: 16 bit up counter |
|
| average | Range: 1 to 32767, 20 points | C200 to C199 Type: 32-bit bidirectional counter |
|
| lock | 15:00 (subsystem) | C220 to C234 Type: 32-bit bidirectional counter |
|
| High-speed counter （C） |
single-phase | Range: -2147483648 to+2147483647 numbers Select up to 4 single-phase counters, with a combined counting frequency not exceeding 5KHz。 Or choose a dual phase or A/B phase counter, with a combined counting frequency that is not high At 2KHz. Note that all counters are locked. |
C235 to C238 4 o'clock |
| Starting from single-phase c/w Stop input |
C241, C242, and C244 three o'clock |
||
| bipolar | C246, C247, and C249 3 points | ||
| A/B phase | C251, C252, and C254 3 points | ||
| Data register （D） |
average | 128 points | D0 to D127 Type: 16 bit data storage register for 32-bit components |
| lock | 7872 points | D128 to D7999 Type: 16 bit data storage register for 32-bit components |
|
| document | 7000 points | D1000 to D7999 parameter settings through 3 blocks of 500 program steps Type: 16 bit data storage register |
|
| external regulation | Range: 0 to 255 2 points | The data is moved from the externally set potentiometer to registers D8030 and 8031 | |
| special | 256 points (including D8013, D8030, and D8031) | From D8000 to D8255 Type: 16 bit data storage register |
|
| Address change | four p.m. | V and Z types: 16 bit data storage registers | |
| indicator （P） |
Used for CALL | 128 points | P0 to P127 |
| Used for interrupting | six o'clock | 100 * to 130 * (rise trigger *=1, fall trigger *=0) | |
| Nested hierarchy | Used for MC and MRC at 8 o'clock | N0至N7 | |
| constant | Decimal K | 16 bits: -32768 to+32768 32-bit: -2147483648 to+2147483647 |
|
| Hexadecimal H | 16 bits: 0000 to FFFF 32-bit: up to FFFFFFFF |
||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-