Local features:

Stable supply of dehumidified air with a dew point of -40 ℃ (optional below -50 ℃);

PID temperature control system, low power consumption, high efficiency (average power consumption 0.6-0.8 degrees/Hr);

Using contactless solid-state relay to control heating (optional);

All stainless steel feeding system;

Closed loop dehumidification system;

Standard configuration of 3 units and high configuration of up to 6 injection molding machines for raw material supply;

The simple operation panel provides a clear understanding of the machine's operating status;

Intelligent fault alarm, intelligent time reservation, and multiple protection devices.

Optional dew point meter to monitor dew point at any time.

Drying Procedure:

While rapidly reducing pressure in the dual cylinder dehumidifier, a dew point dehumidification temperature of -40 ℃ can be achieved. The water and oil removal filter filters and cleans the moisture and oil in the compressed air sent by the air compressor, and then sends it to the dehumidification tower. Continuously send the -40 ℃ dew point dehumidification (one-way transportation) to the sealed vacuum dehumidification material bucket, and absorb all the moisture from the raw materials in the bucket. This system is one-way air delivery and does not require the use of regenerative dehumidification.

Technical parameters: