Low cost with excellent performanceThe MM series flowmeter is an ideal choice for OEMs and users, widely used in medical equipment, air samplers, gas analyzers, pollution monitoring equipment, chemical injectors, blowing equipment, and other fields.

The standard model MMA flowmeter can be applied to gases and liquids. By using compatible components, users can choose to install regulating valves above or below the flowmeter using the provided parts, or not install valves. Transparent nylon material has high chemical stability and does not absorb moisture, making it easy to observe data. Due to the use of easy to disassemble assembly modules, users can disassemble and clean the flowmeter at any time, and reassemble it. In the mass manufacturing process, ultrasonic welding and interchangeable molded cores make it possible to produce shallow sided, valve free MMA flow meters.

MMA flowmeter is not easily damaged, easy to install, and easy to read. Two O.D. installation pipes with an outer diameter of 5/16 "achieve plug-in connection of rubber or plastic pipes. This series also offers a bottom clamp for vertical installation.

MMA flowmeter has a compact structure and a 2 "scale. Due to its excellent manufacturing, this flowmeter has high repeatability within ± 4% accuracy.

When measuring a small amount of air flow with a small flow meter, we recommend that you use itMMF type flowmeter. It is easy to install and requires a very small installation panel. The white background of the fluid tube makes it easy to observe the position of the float. The range of 1-1/2 "is clear and easy to read. The scale is printed on the aluminum plate on the surface of the flowmeter (not directly on the flow tube), so the position of the float is visible at all times.

The MMF type sloping design is fashionable and beautiful, making it easy to quickly install on the front panel of the instrument panel. The flowmeter itself has two 1/4 "O.D. installation connecting pipes inside. It can be easily connected to soft rubber or plastic pipes and secured in place by two spring locators. If necessary, double fastening joints or nylon connectors can also be selected for connecting metal or hard plastic pipes (such as Dwyer Part No. A-328).

The MMF flowmeter has good repeatability and an accuracy of ± 10%, making it a cost-effective and high-quality product.

:: Technical parameters::

MMA type specification

medium:Compatibility with gases or liquids

Material of the liquid receiving part:

Subject: Nylon 12

O-ring: Nitrile rubber-N (optional other materials)

float Sub: Depending on the range, there is black glass available,K Monel copper nickel alloy, stainless steel, tungsten carbide compound

Temperature range:130℉ （54℃）

Pressure range:The one with compression joint is100psi(6.9bar)， The one with pipe clamp is 50psi (3.4bar)

Accuracy:full scale±4%

connection5/16 inch outer diameter for rubber or plastic hoses, equipped with spring clamps, and connected to hard pipes using double compression fittings

Weight:1 oz (28.35 grams)

MMF type specification

Material of the liquid receiving part:

Subject: styrene propylene

float Child: Depending on the range, there are stainless steel, black glass, nylon

Valve: Polyurethane

Temperature range:125℉ （51℃）

Pressure range:50psi(3.4bar)， The valve is 10psi (0.69bar)

Accuracy:full scale±10%

connection1/4 inch outer diameter is used for rubber or plastic hoses, with spring tube clamps, and double compression joints are used to connect with hard tubes

Weight:0.5oz (14.17g)