Double digital tensile testing machine (50-5000N)

Model: KY8000 series
Features: Dual digital tensile testing machine; Electronic dual digital tensile testing machine; Plastic tensile tester; Plastic mechanics tester; Tensile strength testing machine; Rubber tensile tester; Non stretching machine

Double digital tensile testing machine (50-5000N)

Machine model: KY8000 series dual digital tensile testing machine

One Host specifications of dual digital tensile testing machine

A. High precision force sensor: The force accuracy of 50-5000N is within ± 0.8.

B. Capacity segmentation: Full four levels: 0.25/0.5/0.75/1, using high-precision 16 bits A/D

C. Power system: Taiwan AC variable frequency motor+Taiwan frequency converter+Taiwan reducer+T-shaped screw+smooth rod linear bearing+synchronous belt drive.

D. Control system: Using external control methods to achieve more precise speed control within a range of 15~500 mm/min. Zhonglian board adjustment has fast coarse adjustment and slow fine adjustment functions. Automatically stored after testing and can be set to automatically return.

E. Display mode: 8-segment LED digital display.

F. Testing space: Testing width of approximately 350 mm (standard specification), walking space for connecting plates of 950 mm (excluding fixtures) (standard specification)

G. Large deformation two-point extensometer: resolution 1/100, accuracy ± 1mm

H. Safety devices: overload emergency stop device, upper and lower travel limit device, automatic breakpoint stop function.

II Introduction to the software functions of the dual digital tensile testing machine:

A. Sample data: Provide users with set sample data, including width, thickness, diameter, area, gauge length, etc.

B. After the test is completed, it will be automatically archived and powered off without saving. After the test is completed, the strength, yield strength, tensile strength, compressive strength, elongation at any point, elongation at any point, elongation at any point, and so on will be calculated automatically.

III Double digital tensile testing machine accessories

A. One year warranty and one Chinese operation manual.

B. Randomly give away a set of standard dual digital tensile testing machine fixtures (other fixtures can be purchased).

4 Main counting indicators of dual digital tensile testing machine

A. Load element: optional in the range of 50-5000N

B. Power resolution: 1/1000 (5-100N), 1/100 (250-1000N), 1/10 (2500-5000N)

C. Power accuracy: ≤ 0.8%

E. Accuracy of large deformation extensometer: ± 1mm

F. Speed range: 15-500mm/min (special testing speeds can also be customized according to customer needs)

G. Walking space: 950mm (excluding clamps, special testing space can also be customized according to customer needs)

H. Test width: 350mm (special test widths can also be customized according to customer needs)

I. Power supply: Φ 220V 50H.

J. Power: Approximately 600W

K. Machine size: approximately 560 × 660 × 1600 mm in length, width, and height.

L. Machine weight: approximately 180 kg.

Five Dual digital tensile testing machine operation panel

[Dual digital tensile testing machine (50-5000N) (digital display tensile testing machine, including large deformation)]

Wire tensile testing machine Wire tensile testing machine