VIP member
Double Fly Grinding Powder Machine
Product features: Good stability, high reliability, advanced technology, long service life, easy maintenance. Product description: Double fly powder,
Product details
Shuangfei powder, also known as "calcium magnesium powder", is mainly composed of calcium and magnesium. It is commonly used as a filler and is widely used in daily chemical industries such as artificial floor tiles, rubber, plastics, papermaking, coatings, paints, inks, cables, building supplies, food, medicine, textiles, feed, toothpaste, etc. As a filler, it increases the volume of products and reduces production costs.
Note:The particle size of the discharge can be adjusted according to customer requirements. This parameter is for reference only. If there are any changes in the specifications, the actual products of the company shall prevail
Double Flying Powderpulverizerworking principle:
During operation, the main motor drives the spindle and turntable to rotate through a reducer, and the roller pins on the edge of the turntable drive dozens of grinding rollers to roll in the grinding ring raceway.
Large pieces of material are crushed into small particles by a hammer crusher and then sent to the storage bin by a hoist. After passing through a vibrating feeder and an inclined feeding pipe, the material is evenly delivered to the upper part of the turntable's bulk tray.
The material disperses around the circumference under the action of centrifugal force and falls into the raceway of the grinding ring, where it is impacted, rolled, and ground by the ring rollers. After being processed into powder through three layers of raceway, the high-pressure fan sucks in external air into the machine through suction and brings the crushed material into the powder selection machine.
The rotating impeller inside the powder selector causes the coarse material to fall back and be re ground. The fine powder that meets the requirements enters the cyclone powder collector with the airflow and is discharged by the discharge valve at the bottom, which is the finished product. The airflow with a small amount of fine dust is purified by the pulse dust collector and discharged through the fan and muffler.
Double Flying PowderpulverizerThree Flying PowderpulverizerFour Flying PowderpulverizerTechnical parameters:
|
model
|
HGM80
|
HGM90
|
HGM100
|
HGM100A
|
HGM125
|
|
Average working diameter/mm
|
800
|
930
|
1035
|
1300
|
|
|
Number of loops/layer
|
3
|
3～4
|
3
|
4
|
4
|
|
Number of grinding rollers/piece
|
21
|
24～32
|
27
|
34～36
|
40～44
|
|
Spindle speed/r.p.min
|
230～240
|
200～220
|
180～200
|
135～155
|
|
|
Feed particle size/mm
|
≦20
|
||||
|
Finished product particle size range/um (mesh)
|
5-47(325~2500)
|
||||
|
Finished product output t/H
|
0.5-4.5
|
0.6-6.5
|
0.7-7
|
1-8.5
|
1.5-12
|
|
Installation appearance length * width * height/m
|
13.9*4*6.2
|
14.7*4.8*7.2
|
18*4.6*8.6
|
14*9*10.25
|
|
|
Whole machine capacity/KW
|
145-165
|
185-204
|
263
|
263-290
|
380-430
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-