Digital online ozone detection system
Work environment:
PEEK or Ryton CPVC
Sensor Probe Sensor Probe
Temperature range: -5 to 50 degrees Celsius -5 to 50 degrees Celsius
*High pressure: 150 psig@50 85 degrees Celsius psig@50 Celsius
*High flow rate: 10 ft/S 10 ft/S

Power requirements (requiring Class II DC power supply):
Voltage range: DC 10-30V
*High power: 200mW
Typical power: 120mW

Structure:
Processing electrodes: gold cathode, silver anode, silver reference grade (3-electrode polarographic Clark cell)
Protection: Platinum
Membrane: PFA Teflon
Sealing ring: Viton (other materials can be used)
Sensor probe material: PEEK, Ryton or CPVC
DataStick material: 316 stainless steel, PEEK, Ryton or CPVC
Weight:
1.2 pounds=0.54kg (PEEK, Ryton or CPVC)
2.6 pounds=1.18kg (316 stainless steel)

Measurement unit:
Measurement unit: ppm, mg/l, %
Temperature units: Celsius, Fahrenheit

Calibration:
Air: automatically adjusted to the set pressure
Sample: 1 point
Zero: 1 point
Temperature: 1 and 2 o'clock
Ozone and temperature have been pre calibrated before leaving the factory

Compensation options:
Salinity: 0mS/cm to 999.9 mS/cm
Pressure: 539.2 mmHg to 792.4 mmHg
Temperature: Automatically ranging from -5 degrees Celsius to 50 degrees Celsius

Other settings options:
Sensor filter: 0 to 100 seconds
Temperature filter: 0 to 100 seconds

authentication:
**And divergence: CE (EN61326 and EN61326:1998)
Safety: CE (EN 61010-1)，UL 508
Dangerous places: UL Class I, Division 2