Labfors BioEtOH is a newly launched solid fermentation solution by INFORS, which can simultaneously complete saccharification and fermentation on one device. It is the collective wisdom of INFORS' Swiss R&D team with over 50 years of experience in designing and manufacturing biological culture equipment and its customers in the European BioValley (Roche, Novatis, etc.), and can control the temperature required for fermentation PH、PO2、 Parameters such as rotational speed and gas flow rate are ideal choices for solid-state fermentation.
*Suitable for fermentation applications of high viscosity and semi-solid samples
*Hydrolysis and simultaneous saccharification fermentation
*Good mixing effect, helping the reaction proceed
*Solid injection is simple, convenient, and easy to operate
*Good temperature control for convenient synchronous saccharification and fermentation
*Process control

The touch screen design of the design is easy to operate, and the controller has the characteristics of being movable and controlling multiple tanks simultaneously. One touch screen can control six devices simultaneously, display the reaction parameters of six devices at the same time, and also display dynamic changes in real-time curves. Z can control 24 reaction process parameters and has good scalability;

Breaking through the traditional lateral arrangement of peristaltic pumps, INFORS' four peristaltic pumps adopt a lateral arrangement, which is the result of INFORS' long-term experience accumulation. Because there is a possibility of pump tube rupture in peristaltic pumps during long-term operation, the lateral arrangement of peristaltic pump system can avoid the impact of liquid leakage on the pump head; At the same time, the detachable pump head can disassemble four pump heads at once, saving operation time and simplifying pump tube disassembly and assembly work.

Mixing design
*A high torque mixing motor and matching mixing blade design ensure good mixing effect even in a high viscosity material or a relatively dry state of the material;
*Spiral stirring blades are used to mix materials and move fermented materials layer by layer;
*The combination of anchor type agitator and spiral agitator can achieve the effect of scraping the wall;
*The bottom stirring blade is used to stir the bottom material and move it up;
*Blade type agitator is used for mixing and shearing materials.

Solid packing port design
A solid filling port with a diameter of approximately 4cm is located at the lid of the tank for easy feeding.

Excellent temperature control
Dual level temperature control, with temperature sensors installed inside the tank and at the jacket water flow point to prevent overheating at the center of the tank, ensuring that the temperature and enzyme activity (fermentation is a process that requires enzyme degradation) are not damaged.

shape parameter
Compact design, smaller footprint, external dimensions (B x T x H): 465 x 465 x 900 mm; cover an area
Less than 1m2, saving laboratory space;

Tank parameters
*The total volume is 3.6L, with a working volume ranging from 1.0L to 2.3L.
*Thick walled borosilicate glass cylindrical jacket tank body, hemispherical tank bottom, tank cover made of 316L stainless steel.
*Adopting an off site sterilization design, easy to disassemble and install; Sterilization ring inoculation kit, easy to operate, reduces the probability of bacterial infection.
*Mixing system: Top mounted mixing, speed control range 0-100rpm, accuracy ± 1rpm;
*Provide online detection probes: temperature probe, pH probe, PO2 probe, defoaming probe.
*Temperature control range: Cooling water temperature+5 ℃~60 ℃, control accuracy ± 0.1 ℃. The temperature control inside the tank is controlled by a water jacket, with a jacket area not less than 70% of the tank surface area. The water inside the jacket is forced to circulate continuously in a closed loop through the main circulation pump during the operation of the bioreactor.
*PH detection range: 2.00-12.00pH, PID automatic control, control accuracy ± 0.01.
*PO2 detection range: 0% -100%, PID automatic control, control accuracy ± 0.1%.