The Wind Knife DZ-1 Wind Knife Drying Machine has eliminated the original brush drying machine. This machine adopts the principle of alternating cold and hot air blowing bottles. First, high-pressure air flow is used to break the water droplets on the bottle wall, and then hot air is used for drying. The feature of this machine is to avoid the maintenance troubles and high operating costs caused by the serious wear and frequent replacement of the original brush when brushing bottles. Instead, it uses high-pressure air to blow dry the outer wall of the bottle, ensuring that the bottle wall is clean and free of dirt, easy to label, easy to operate, and easy to maintain.

Circulating hot air is used, and the air supply system adopts a circulating method. After drying the bottle, a small part of the hot air is discharged outside the machine, and most of it is sucked back into the heating chamber by the fan for recycling; The drying tunnel adopts composite insulation materials and thickens the insulation layer. Ensure the drying temperature.

Stepless sensing temperature control system, the drying tunnel temperature can be pre-set according to work needs and automatically controlled by the temperature control system; When the temperature rises to a dangerous level, it will automatically shut down.

Technical parameters:

1. Production capacity: 5000 bottles/hour

2. Applicable bottle types: diameter 50~110, height 150~350

3. Overall power: 11.5KW

4. Dimensions: 2800X800X1500

5. Whole machine weight: 800 kilograms