Sincerely thank you for choosing our companyradar level gaugeYe Li is a professional manufacturerRadar level gauge manufacturerAnd alsoRadar level gauge priceDiscount,Please contact customer service for a quotation for the radar level gauge,Large quantities are preferred! The YLPS603 series sensor is an advanced radar based level measuring instrument with a measuring distance of up to 70 meters. It can be used for level measurement of storage tanks, intermediate buffer tanks, or process containers, and outputs 4-20mA analog signals.

1. Characteristics of Ye Li radar level gauge:
● Adopting advanced non-contact measurement
Made with extremely stable materials
Measure the level of objects and solid media
Can measure all media with a dielectric constant greater than 1.8
Measurement range 0... 20m (can be extended to 35 meters)
Adopting a two-wire system and loop power supply technology, the power supply voltage and output signal are transmitted through a two core cable
● 4... 20mA output or digital signal output
Resolution 1mm
Not affected by working conditions such as noise, steam, dust, vacuum, etc
Not affected by changes in medium density, viscosity, and temperature
The process pressure can reach 4MPa
The process temperature can reach 250 ℃

2. YLPS60 series intelligent radar level gauge instrument parameters:
YLPS61 application: Simple process conditions, corrosive objects, slurries, solids such as sewage storage tanks, acid and alkali storage tanks, slurry storage tanks, solid particles, and small oil storage tanks
Measurement range: 0-70 meters optional
Process connection: G11/2 thread or 11/2NPT
Medium temperature:- 40-120℃
Process pressure:- 1.0-4bar
Repeatability: ± 2mm
Accuracy:< 0.1%
Frequency range: 6.8GHz
Explosion proof/protection level: Exia IIC T6/IP68
Signal output: 4-20mA/HART (two-wire)

YLPS62 application: Storage or process containers for corrosive objects, slurries, solids such as water storage tanks, acid and alkali storage tanks, slurry storage tanks, solid particles, and small oil storage tanks
Measurement range: 0-70 meters optional
Process connection: flange
Medium temperature:- 40-150℃
Process pressure:- 1.0-20bar
Repeatability: ± 2mm
Accuracy:< 0.1%
Frequency range: 6.8GHz
Explosion proof/protection level: Exia IIC T6/IP68
Signal output: 4-20mA/HART (two-wire)

YLPS63 application: Suitable for various storage containers or process measurement environments, including objects, slurries, and solids such as crude oil and light oil storage tanks, raw coal and powder coal storage areas, volatile object storage tanks, coke material levels, slurry storage tanks, and solid particles
Measurement range: 0-70 meters optional
Process connection: flange
Process temperature:- 40-250℃
Process pressure:- 1.0-40bar
Repeatability: ± 2mm
Accuracy:< 0.1%
Frequency range: 6.8GHz
Explosion proof/protection level: Exia IIC T6/IP68
Signal output: 4-20mA/HART (two-wire)

On site installation reference:


YLPS64 application: suitable for measuring powder materials, solid particles, and block materials
Measurement range: 35 meters
Process connection: universal flange
Medium temperature:- 40-250℃
Process pressure:- 1.0-4bar
Repeatability: ± 2mm
Accuracy:< 0.1%
Frequency range: 6.8GHz
Explosion proof/protection level: Exia IIC T6/IP68
Signal output: 4-20mA/HART (two-wire)

YLPS65 application: Suitable for tank measurement of low dielectric constant objects and objects with stirrers
Measurement range: 0-30 meters optional
Process connection: flange
Medium temperature:- 40-250℃
Process pressure:- 1.0-20bar
Repeatability: ± 2mm
Accuracy:< 0.1%
Frequency range: 6.8GHz
Explosion proof/protection level: Exia IIC T6/IP68
Signal output: 4-20mA/HART (two-wire)

YLPS66 application: Suitable for measuring the material level of blast furnaces, storage tanks with thicker tank tops, and working conditions with higher installation of short pipes
Measurement range: 35 meters
Process connection: flange
Process temperature:- 40-250℃
Process pressure:- 1.0-40bar
Repeatability: ± 2mm
Accuracy:< 0.1%
Frequency range: 6.8GHz
Explosion proof/protection level: Exia IIC T6/IP68
Signal output: 4-20mA/HART (two-wire)