Components and usage of corn harvesting and storage machine:

1. The front wheels of the Qingshu machine are equipped with wheel side reducers, which have good sealing performance and will not wear out due to wind and sand. Stronger passability. Suitable for complex road surfaces.

2. Simple and compact structure, lightweight transmission, power saving, small turning radius, suitable for harvesting different sizes of land

3. Equipped with 20 sets of herringbone cutter rollers, the clearance between the moving and fixed blades is ensured, thereby ensuring consistent cutting and the quality of the chopped sections; All axles undergo dynamic balancing treatment to reduce vibration and extend the service life of bearings.

4. Equipped with reinforced wear-resistant blade secondary fans to increase the fan's conveying capacity, it can provide better conveying air volume for dry and light materials or wet and heavy materials, and prevent blockage;

5. Adopting a roller type grain crusher to ensure the quality of materials, the grain crushing rate reaches over 95%, meeting the feed standards of large-scale pastures; (Optional)

6. Equipped with a large grass box for easy recycling and harvesting on the ground; The projectile barrel moves in multiple sections, making it convenient to operate the grass box and collect on board;

7. Equipped with Weichai 210-270 horsepower engine, it has low fuel consumption and strong power;

8. The machine is equipped with a rotary cutting table, with a feeding inlet width of 600mm. The cutting table, pressure roller, and drum are all connected quickly for easy maintenance; Gear driven cutting platform saves power and is less prone to grass entanglement.

9. Optional Eaton (imported from the United States) static hydraulic drive for more flexible operation and higher efficiency; (Optional)

10. Optional 8-inch LCD screen, using dual-mode positioning of Beidou and GPS satellites, for real-time remote monitoring of the machine; The accuracy of equipment acre calculation is as high as 98%; Calculate acres while working, without the need for manual operation, improving work efficiency. Three cameras enable reverse imaging, blind spot imaging, and monitoring of grain storage; (Optional)

11. This machine can be equipped with a front rolling cutter cutting platform, which can collect the entire plant when it is lying down.

12. Optional four-wheel drive, stable handling performance, and strong passability.

13. Configure one key oil injection for the entire vehicle, saving time and effort. (Optional)

14. Equipped with electronic control and button based operation, convenient for the driver to operate. (Optional)

15. Configure anti spitting function, which can cause blockage due to sudden increase in feeding volume, without the need for manual material extraction, with one click automatic anti spitting. (Optional)

The corn harvesting and storage machine is a machinery used for corn harvesting, which can assist in agricultural harvesting. After cutting corn stalks, they can be directly returned to the field, which has been favored and recognized by many farmers.

There are currently two types of corn straw harvesters on the market: one is a straw pulverizer that crushes into powder, and the other is a corn straw storage machine that cuts and crushes corn straw. However, corn straw crushers can only use 500 or 600-6 models, and wet corn stalks with high moisture content are prone to clogging the sieve holes; Another type of corn straw storage machine is to crush and separate the corn stalks before cutting them, which can be used for both dry and wet corn stalks, as well as for lodging corn stalks. This greatly facilitates farmers to cope with a large number of harvesting operations.

　　The operation of corn straw green storage machine:

The corn straw green storage machine uses the power output shaft of the tractor to output power, which is transmitted to the recycling machine through a universal joint. The recycling machine uses gear transmission and V-belt transmission to drive the drum shaft to rotate at high speed to chop the straw. Cutting type green storage type stem and ear harvesting, using a stem pulling rod type ear picking device, with a rolling cutter type cutting below, collected by a dragon, and lifted by a fan after secondary crushing. The advantage of this green storage machine is that it can cut off the collected straw, which is more conducive to the storage of cattle and sheep farmers.

　　Introduction to Corn Harvesting and Green Storage Machine:

The integration of harvesting, cutting, crushing, and throwing has achieved the goal of multi-purpose, low consumption, and comprehensive utilization of biomass energy in one machine, which is in line with national industrial policies and has profound significance for the development of biomass energy projects. The whole machine is easy to maintain and has a low price, making it an ideal matching equipment for various specifications of breeders and farms.

　　Advantages of using a corn harvesting and storage machine:

At present, most of the grass cutters, kneading machines, crushers, and straw returning machines used in rural areas cannot achieve the goal of single machine straw recycling. However, the integration of corn straw harvesting and crushing has truly achieved comprehensive utilization of straw, creating higher added value for straw collection, storage, and utilization.

　　Application scope of corn harvesting and storage machine:

Suitable for harvesting and crushing various standing dry and wet crop straw after fruit harvesting. After harvesting and crushing crop straw, it can be directly applied to livestock farms, feed factories for ensiling feed or processing straw pellet feed. It can also be used to produce biomass power generation fuels such as charcoal and straw coal, and can be used as a cultivation medium for edible mushroom growers in various industries.

　　Related products:Corn green storage machine manufacturer http://www.xxltqcj.com/product/14.html